Ships from the USA
Screen + Lens Kit
SSL encrypted
Specifications ▾
Shipping ▾
Returns ▾
Description
The Phone Umbrella Sun Shade with Suction Cup Stand is a two-piece phone parasol: a 20 by 19 centimeter canopy plus a silicone suction stand that sticks to the back of a smooth phone case and props the shade exactly where you want it. Because the stand carries the umbrella instead of the phone carrying it, your hands stay free and the phone can sit on a table, a towel, or a deck rail while the screen stays shaded. The whole set weighs 88 grams, and the stand works on its own as a small phone holder when you do not need the canopy at all.
Most phone shades ask you to hold something. This one does not. That single design decision is what makes it different from a clip or a magnet.
The stand is molded silicone over an ABS core with a suction base and a non-slip pad underneath. It grips the smooth back of a phone case, and it also sits flat on a table as a standalone prop.
The canopy slots into the stand and angles over the screen. Because the two pieces separate, you can leave the stand attached to your case permanently and bring the umbrella out only when the sun is a problem.
There is an honest limitation worth stating up front. The suction base needs a smooth surface to hold. It will not grip textured cases, heavily matte silicone cases, or a bare phone with a rough finish, and a quick wipe of the case before you press it on makes a real difference.
Within that constraint it does something no clip can. It holds the shade without touching the edges of the phone, which leaves every button, port, and the full screen completely unobstructed.
The set folds down small. The canopy collapses and the stand is barely larger than a bottle cap, so both disappear into a bag pocket between uses.
The Problem
- Outdoors the display becomes a mirror, and reading anything means angling the phone away from the sun with both hands.
- Clip-on shades grab the edge of the phone, which can sit over a button, a port, or the part of the frame you hold.
- A phone left face-up on a table in full sun heats quickly and then dims itself, which makes the glare problem worse.
- Holding a hat or a menu over the screen works for about four seconds and occupies the hand you wanted to use.
The Solution
- A silicone suction stand carries the canopy on the back of the case, so nothing touches the edges of the phone.
- The 20 by 19 centimeter canopy puts a pool of shade over the display and leaves both of your hands free.
- Shading the phone slows the solar heat buildup that triggers automatic dimming and throttling.
- The stand doubles as a small phone prop on a flat surface, so it earns its place in the bag even on cloudy days.
Triple Shield Protection
Shield One: Glare
Glare happens when direct light hits the glass and bounces back before it reaches the image underneath. A canopy held above the phone removes that light at the source.
At 20 by 19 centimeters the canopy covers a typical phone with margin, which matters because a shade that only half covers the screen leaves a bright band across the display.
Angle is the whole game. Tilt the canopy toward the sun rather than straight up and the shadow lands on the screen instead of beside it.
Shield Two: Heat
A phone lying in direct sun absorbs far more energy than one in shade, and its internal temperature rises well above the surrounding air. The phone responds by dimming the screen and slowing down.
Keeping the body of the device in shade is the simplest way to reduce that solar load. This is passive shading rather than active cooling, so it slows heat buildup rather than removing heat.
The effect is most noticeable when the phone is both in the sun and working, such as playing music poolside or holding a video call outdoors.
Shield Three: Direct Sun
The canopy casts shade on whatever sits under it, which is why people end up using these over a drink, a paperback, or a camera as often as over a phone.
We describe this as shade rather than as a rated sun protection factor. The source listing does not state a UPF or SPF number, so we do not publish one.
What we can say plainly is that the canopy blocks direct sunlight across the area it covers. That is a physical fact rather than a marketing number.
Key Features
- ā Hands-free by design. The stand carries the canopy, so you are not holding a shade over your own screen.
- ā Silicone and ABS construction. A flexible silicone body over a rigid core, which is what lets the stand grip and stay put.
- ā Suction base with non-slip pad. Holds on smooth case backs and resists sliding when the set is used on a table.
- ā 20 by 19 centimeter canopy. Sized to cover a full phone screen with margin at a working angle.
- ā Nothing on the edges. Buttons, ports, and the whole display stay clear because the mount sits on the back panel.
- ā Two pieces that separate. Leave the stand on your case and carry only the folded canopy when space is tight.
- ā Doubles as a phone prop. Without the umbrella the stand holds a phone upright on a flat surface for video or reading.
- ā 88 grams for the set. Light enough to live permanently in a beach bag or a glove box.
- ā Fits 4 to 10 inch devices. The mount is surface-based rather than size-based, so it spans phones and small tablets.
- ā No adhesive residue. Suction rather than glue means the stand lifts off cleanly whenever you want it gone.
Specifications
| Compatible Devices | Phones and tablets roughly 4 to 10 inches, with a smooth case back |
| Material | Silicone stand over ABS, fabric canopy |
| Attachment Method | Silicone suction cup onto a smooth case back, non-slip base pad |
| Coverage Area | Canopy approximately 20 x 19 cm |
| Adjustability | Canopy seated by hand in the stand; stand repositionable on the case |
| Folded Size | Canopy collapses; stand is pocket sized |
| Weight | 88 g / 3.1 oz for the set |
| Secondary Use | Stand works alone as a compact phone holder |
| Included in Box | One silicone suction stand and one mini umbrella canopy |
How It Compares
| Feature | Gorilla Cases | Competitor A | Competitor B |
|---|---|---|---|
| Mount location | Back panel | Edge clip | Edge clip |
| Blocks buttons or ports | No | Sometimes | Sometimes |
| Stand material | Silicone over ABS | Thin plastic | Thin plastic |
| Canopy size | 20 x 19 cm | About 16 cm | About 14 cm |
| Works as a phone stand | Yes | No | No |
| Pieces separate for carry | Yes | No | No |
| Needs a smooth case back | Yes | No | No |
| Set weight | 88 g | About 70 g | About 110 g |
Who This Is For
Poolside and Lounging
You are flat on a lounger with a drink in one hand, and the phone is propped on your stomach reflecting the entire sky back at you.
The Phone Umbrella Sun Shade with Suction Cup Stand holds the canopy for you, so the screen stays readable without you holding anything. The stand grips the smooth back of most hard cases.
When the sun drops, the canopy comes off and the stand stays put until tomorrow.
Outdoor Photographers
Composing a shot on a phone in open sun is guesswork, because you cannot see the frame well enough to judge exposure or focus.
A back-mounted shade leaves the edges of the phone completely free, which matters when the device is in a cage, a gimbal, or a tripod clamp. Nothing on the sides competes for the same grip points.
The stand also props the phone at a shallow angle for reviewing shots on a flat surface.
Hikers and Campers
Checking a map at altitude in bright sun is the moment a phone screen is least readable and most needed, and you usually have a pole or a pack strap in one hand.
Because the set separates, the stand can live on your case and the folded canopy rides in a hip pocket. Total carry weight is 88 grams for both pieces.
At camp the stand props the phone upright without any extra gear.
Setup and Troubleshooting
- Check your case surface first. The suction base needs a smooth, non-porous back. Glossy hard cases work well; textured, rubberized, and heavily matte silicone cases generally do not.
- Clean the spot. Wipe the case back with a damp cloth and let it dry. Dust and sunscreen are the two most common reasons a suction mount lets go.
- Press and hold. Place the suction base flat against the case, press firmly for several seconds, and work from the center outward to push air out from under it.
- Seat the canopy. Slot the umbrella into the stand and open it fully until the ribs lock out, the same way a full-size umbrella opens.
- Set the angle, then verify. Lean the canopy toward the sun and look at where the shadow actually falls. Adjust until the whole display sits inside the shaded area.
- Separate before packing. Close the canopy and lift the stand off the case so neither piece gets bent by the rest of your bag.
Troubleshooting
The suction cup will not stick. The case back is almost certainly textured or dusty. Clean it, or move the stand to a smoother area such as a flat glossy panel.
It holds and then drops after a while. Air is leaking in slowly, usually because the surface is slightly curved. Re-press the base, or relocate it to the flattest part of the case.
The shade misses the screen. The canopy is too upright. Tilt it toward the sun until the shadow moves across the display.
The canopy leans over time. Reseat the umbrella more deeply in the stand so the shaft sits square rather than at an angle.
It covers the front camera. Rotate the stand so the canopy approaches from the side rather than from the top of the phone.
Bundle and Save
Solo
One Phone Umbrella Sun Shade with Suction Cup Stand. Sensible if you want to confirm the suction base likes your particular case before buying more.
Duo
Two sets at a lower per-unit cost than buying singly. This is the usual choice, because the second stand tends to stay on a partner case or a tablet.
Trio
Three sets at the lowest per-unit cost in the range. Built for families heading somewhere sunny who would rather not share one canopy between three phones.
Save on Your Order
Use code 10OFF at checkout.
Spend $50+ and get a Free Screen and Camera Lens Kit.
Questions before you order? Call us at (978) 797-0223.
Frequently Asked Questions
What case does the Phone Umbrella Sun Shade with Suction Cup Stand work on?
The Phone Umbrella Sun Shade with Suction Cup Stand needs a smooth, non-porous case back for the suction base to hold. Glossy hard cases work well, while textured and heavily matte silicone cases generally do not.
Can the Phone Umbrella Sun Shade with Suction Cup Stand stick to a bare phone?
It can hold on a bare phone with a smooth glass or polished back, but the Phone Umbrella Sun Shade with Suction Cup Stand is designed around case backs. A rough or heavily curved bare finish will not give the base enough flat area.
How big is the canopy on the Phone Umbrella Sun Shade with Suction Cup Stand?
The canopy on the Phone Umbrella Sun Shade with Suction Cup Stand measures approximately 20 by 19 centimeters when open. That covers a full phone screen with margin once the canopy is angled toward the sun.
What is the Phone Umbrella Sun Shade with Suction Cup Stand made of?
The stand on the Phone Umbrella Sun Shade with Suction Cup Stand is molded silicone over an ABS core with a non-slip pad on the base. The canopy is fabric on a folding rib frame.
Does the Phone Umbrella Sun Shade with Suction Cup Stand work as a phone holder?
Yes. With the canopy removed, the stand from the Phone Umbrella Sun Shade with Suction Cup Stand props a phone upright on a flat surface, which is useful for video and reading indoors.
How heavy is the Phone Umbrella Sun Shade with Suction Cup Stand?
The complete Phone Umbrella Sun Shade with Suction Cup Stand set weighs 88 grams, or about 3.1 ounces. That is for the stand and the canopy together.
Does the Phone Umbrella Sun Shade with Suction Cup Stand have a UPF rating?
We do not publish a UPF or SPF number for the Phone Umbrella Sun Shade with Suction Cup Stand because the source listing does not state one. The canopy blocks direct sunlight across the area it covers, and that is the claim we stand behind.
Will the Phone Umbrella Sun Shade with Suction Cup Stand keep my phone cooler?
Shading a device reduces the solar energy it absorbs, which slows heat buildup. The Phone Umbrella Sun Shade with Suction Cup Stand is passive shade rather than active cooling, so it will not bring a phone below the surrounding air temperature.
Does the Phone Umbrella Sun Shade with Suction Cup Stand block any buttons?
No. The Phone Umbrella Sun Shade with Suction Cup Stand mounts on the back panel rather than the edges, so every button, port, and the entire display stay clear.
Can I use the Phone Umbrella Sun Shade with Suction Cup Stand with a pop socket?
Only if there is enough clear flat area left on the case. The Phone Umbrella Sun Shade with Suction Cup Stand needs its own smooth patch, so a large grip in the center of the case can crowd it out.
Does the Phone Umbrella Sun Shade with Suction Cup Stand leave marks?
The Phone Umbrella Sun Shade with Suction Cup Stand uses suction rather than adhesive, so it lifts off cleanly. Any faint ring from the cup wipes away with a damp cloth.
Can the Phone Umbrella Sun Shade with Suction Cup Stand be used on a tablet or e-reader?
Yes, provided the back surface is smooth. The Phone Umbrella Sun Shade with Suction Cup Stand spans devices roughly 4 to 10 inches, though canopy coverage on a large tablet will be partial.
How does the Phone Umbrella Sun Shade with Suction Cup Stand handle wind?
In still or lightly breezy conditions the Phone Umbrella Sun Shade with Suction Cup Stand holds its position well. In gusty conditions, lower the canopy angle so there is less surface for the wind to catch.
Can I leave the Phone Umbrella Sun Shade with Suction Cup Stand attached all the time?
Yes. Many people leave the stand of the Phone Umbrella Sun Shade with Suction Cup Stand on the case permanently and carry only the folded canopy, which keeps setup to a few seconds.
How do I clean the Phone Umbrella Sun Shade with Suction Cup Stand?
Wipe the silicone stand and the suction face of the Phone Umbrella Sun Shade with Suction Cup Stand with a damp cloth, which also restores grip. Let the canopy air dry fully open before folding it away.
Keep Reading
See the rest of our outdoor and everyday carry range in the Gear collection.
For more on screen visibility and surface finishes, read Gorilla Cases Glass Screen Protectors.
If your phone lives outdoors, Top 5 Military-Grade Cases for the Galaxy S23 Ultra covers the case side of the same problem.