iPhone 14 Plus, Premium Aluminum Shockproof Protective Case Protector Film 6.7 inch

Why the iPhone 14 Plus Premium Aluminum Shockproof Case Is Essential for Minimalists and Metal Lovers

Some people want their iPhone 14 Plus wrapped in plastic. You want it framed in metal. This premium bumper is machined from aluminum alloy, then carefully ground and polished into a frame that hugs the 6.7-inch iPhone 14 Plus (2022) like factory hardware. Inside, a built-in cushioning cotton lining separates metal from phone, absorbing shock the way padding absorbs a hit inside a flight case. A bonus camera lens protection film ships in the box, and the open-frame ring design keeps wireless charging and signal completely unobstructed.

Built for engineers, design-minded professionals, motorcycle commuters, minimalists who hate bulky cases, and anyone who believes metal should feel like metal, this is the best iPhone 14 Plus aluminum bumper case for showing off your phone while still protecting it. Welcome to the Gorilla Family.

Key Features

• Precision finish: Black anodized aluminum, carefully ground and polished so every edge feels deliberate — no burrs, no rough corners.
• Premium materials: aerospace-grade aluminum alloy frame with a soft cushioning cotton lining where metal meets phone.
• Case type: open-back bumper frame that protects the corners and edges while leaving the iPhone's glass back visible.
• Signal-friendly ring design: the segmented frame geometry avoids antenna interference — full bars, no metal-case signal drop.
• Bonus lens protection film: an extra rear camera film is included free to guard the lens glass against scratches.
• Shockproof construction: the rigid frame plus cushioned lining absorbs drops from 8 ft / 2.4 m onto hard surfaces, focused where phones actually land — the corners.
• Screen protection: the frame rises about 1 mm above the display, so the screen never touches the table face-down.
• Camera protection: a raised top edge plus the included lens film keep the camera array guarded from both impacts and scratches.
• Charging compatibility: the open-frame design supports Qi wireless charging without removal; this is not a magnetic case and does not add MagSafe.
• Easy install and removal: the frame opens with simple fasteners — on or off in under a minute, no pry tools.
• Compatibility: variants available for the iPhone 14 (6.1-inch), iPhone 14 Pro, iPhone 14 Plus (6.7-inch), and iPhone 14 Pro Max — each fits its named model ONLY. It does NOT fit the iPhone 13 series or iPhone 15 series.

Materials Explained — What Aluminum Alloy and Cushioning Cotton Actually Feel Like

Aluminum alloy is the material of aircraft frames and high-end camera bodies — cool to the touch, rigid under pressure, and far more scratch-resistant than painted plastic. Here it forms a precision bumper that spreads corner impacts along the entire frame instead of letting them punch into one point of your phone.

The cushioning cotton lining is the quiet hero. Like the padded interior of a watch box, it sits between the metal and your phone's frame, soaking up vibration and shock so the rigid aluminum never transmits a hit directly to the chassis. It also means zero metal-on-glass contact and zero installation scuffs.

Because this is an open-back bumper, your iPhone's own glass back stays on display — Deep Purple, Starlight, Midnight, whichever you chose — instead of hiding under plastic.

Altogether the bumper weighs about 1.6 oz (45 g) and adds roughly 2 mm around the edges — the lightest way to get metal-frame protection on a 6.7-inch phone.

Browse More iPhone 14 Plus Cases

Comparing metal, rugged, and slim styles? Explore the full iPhone 14 Plus cases collection, shop now and find the right protective phone case for your lifestyle.

Real-World Use Cases

• The Design Professional: wants the phone to look intentional in client meetings — a polished metal frame, not a rubber sleeve.
• The Motorcycle Commuter: trusts an 8 ft / 2.4 m rated aluminum frame when the phone lives in a tank-bag mount over potholes.
• The Minimalist: hates case bulk but has cracked one too many naked phones — 2 mm of metal is the compromise that works.
• The Engineer: appreciates that the segmented ring design solves the metal-case antenna problem instead of ignoring it.
• The Gift-Giver: needs a premium-feeling gift for the person who already owns everything — machined metal always lands.

Feature-to-Benefit Mapping

Step-by-Step Installation Guide

1. Clean your iPhone 14 Plus with a microfiber cloth, especially the edges and camera area.
2. Apply the included lens protection film over the rear camera glass first, smoothing from the center outward.
3. Open the bumper frame and seat the phone into the cushioned channel, aligning the button cutouts.
4. Close the frame and secure it evenly — do not overtighten; snug is correct.
5. Test the buttons, mute switch, Lightning port, and speakers, then set the phone on a Qi pad to confirm wireless charging engages.

Troubleshooting and Tips

• Frame feels loose after installation? Re-check that the phone is fully seated in the cushion channel on both sides before securing the frame.
• Worried about signal loss? The segmented ring design prevents antenna detuning — if bars look low, toggle airplane mode once after install.
• Wireless charging not starting? Center the phone on the pad; the open back means alignment, not the case, is the variable.
• Fine scratches on the metal? Light marks polish out with a microfiber cloth; avoid abrasive cleaners that dull the anodized finish.
• Cleaning the bumper? Use a damp cloth and mild soap — never alcohol wipes, which can degrade the anodized coating over time.

FAQs

Which phones does this case fit?
Variants are available for the iPhone 14 (6.1-inch), iPhone 14 Pro, iPhone 14 Plus (6.7-inch), and iPhone 14 Pro Max (all 2022) — select your exact model. Each variant fits its named model ONLY and does NOT fit the iPhone 13 series, iPhone 15 series, or any other phone.

What comes in the box?
The aluminum bumper frame with pre-installed cushioning cotton lining, a free rear camera lens protection film, and the installation hardware.

Does a metal case block my signal?
No — the segmented ring design breaks up the metal loop that causes antenna problems on cheap metal cases. Calls, 5G, Wi-Fi, and GPS work normally.

Does it work with MagSafe or wireless charging?
Qi wireless charging works because the back is completely open. This is not a magnetic case and does not add MagSafe — MagSafe accessories will attach to the phone's own magnets but the case does not strengthen them.

What is the drop protection rating?
The frame and cushioned lining are rated for drops from 8 ft / 2.4 m. Note the back glass is exposed — add a back film if you want full-surface coverage.

Does Face ID still work?
Yes — the bumper does not cover any part of the front.

Are the buttons and ports accessible?
Yes — precision cutouts leave the buttons, mute switch, Lightning port, and speakers fully exposed; nothing is covered or stiffened.

Can I use a screen protector with it?
Yes — the frame clears the display, so any flat or edge-to-edge glass protector fits without lifting.

Can I attach a lanyard or strap?
No lanyard hole on this model — the machined frame is designed to stay clean and minimal.

Will the finish wear or fade?
The anodized coating is bonded into the metal, not painted on — it resists chipping and UV fading far better than coated plastic.

Is it professional enough for work?
This is arguably our most professional-looking case — polished black metal that reads like part of the phone.

Is this a good gift?
Yes — machined aluminum feels premium out of the box, and free 30-day returns cover a model swap if you guess the wrong iPhone.

Does it add much weight?
About 1.6 oz / 45 g and roughly 2 mm around the edges — lighter than most full rugged cases despite being metal.

Is installation difficult?
No — the frame opens and closes with simple fasteners and goes on or off in under a minute, with the cotton lining preventing any scratches.

What is the return policy?
Yes — Gorilla Cases offers free 30-day returns on all iPhone 14 Plus cases. If the case doesn't fit your iPhone 14 Plus or you're not satisfied, contact our team within 30 days for a fast replacement or full refund. No restocking fees.

Why Gorilla Cases?

Gorilla Cases exists for people who refuse to choose between protection and design. The Gorilla Family trusts us because we drop-test every design — metal included — describe honestly, and back every case with free 30-day returns. Give your iPhone 14 Plus the frame it deserves. Shop now at gorillacasestore.com

What Gorilla Family Customers Are Saying

★★★★★
Feels like Apple should have made it
The machining on this bumper is genuinely impressive — flush seams, perfect button access. My Deep Purple back stays visible and the phone survived a drop off my standing desk onto hardwood without a mark.
— Nathan C., Seattle, WA

★★★★★
Finally a metal case that does not kill signal
I returned two other aluminum cases for dropping bars. This one's ring design actually works — full 5G in the same dead spots. The cotton lining means zero rattle.
— James F., London, UK

★★★★★
Minimalist protection done right
I hate bulky cases. This adds almost nothing in the pocket and the corners — the only part of a phone I have ever broken — are solid metal now. The free lens film was a nice surprise.
— Anika R., Denver, CO

★★★★★
Survived the motorcycle commute test
Six months in a handlebar mount over Ontario potholes. The frame has two scuffs that polished right out; the phone has none. Wireless charging every night without removing anything.
— Mathieu G., Montreal, QC, Canada

★★★★½
Beautiful, but remember the back is open
The frame itself is flawless and feels fantastic in hand. Just know the glass back stays exposed — I added a skin for peace of mind. Wish a back film were included like the lens film is.
— Erik J., Phoenix, AZ

Read More From Gorilla Case Blogs

Curious how metal cases stack up? Read our iPhone 14 Pro aluminum tactical metal case spotlight, or see how an aluminum bumper handles military-grade testing in our aluminum bumper deep dive.