Ships from the USA
Screen + Lens Kit
SSL encrypted
Specifications ▾
Shipping ▾
Returns ▾
Description
The Magnetic Phone Umbrella Sun Shade with Finger Ring snaps onto the back of a magnetic phone or case and holds a 25 centimeter canopy on a bendable metal arm, so your screen stays readable in open sun without you holding anything over it. The arm bends and stays put wherever you leave it, the built-in finger ring rotates a full 360 degrees for grip, and a stick-on metal ring is included so devices without a magnet can use it too. Total length from base to canopy is about 33 centimeters, and the whole thing weighs roughly 110 grams.
Magnetic attachment is the fastest mount there is. There is no clamp to seat and no suction cup to clean. You bring it near the back of the phone and it is on.
What makes this version different from a plain magnetic shade is the arm. It is a bendable metal hose rather than a fixed hinge, so you are not choosing between three preset angles.
You bend it once to put the shadow exactly on your screen, and it holds that shape. When the sun moves, you bend it again. The supplier notes that the extended arm is designed so the canopy clears the display rather than sitting across it.
The finger ring is the second half of the design. It rotates 360 degrees and gives you a secure one-handed grip, which matters because a phone with something mounted on the back is slightly more awkward to hold than a bare one.
The canopy itself is 25 centimeters across with six ribs, made from impact cloth with a silver coating on the underside. It folds closed and the whole unit drops into a pocket or a bag.
One note on where to use it: the supplier does not recommend this shade in a moving vehicle, and neither do we. Set it up when you are stationary.
The Problem
- In open sun the screen reflects the sky, and reading it means squinting, tilting, and turning your whole body away from the light.
- Fixed-angle shades only work when the sun happens to be where the designer assumed it would be.
- A phone baking in direct sun heats up, then dims its own display and slows down, which defeats the point of raising brightness.
- Clamps and suction cups both need setup time and both fail on the wrong kind of case.
The Solution
- A magnetic base snaps to the back of the phone in about a second, with no seating, pressing, or cleaning first.
- The bendable metal arm holds any angle you shape it into, so you can follow the sun instead of working around it.
- Shading the body of the phone slows the solar heat buildup that causes automatic dimming and throttling.
- The 360 degree finger ring restores a confident one-handed grip while the shade is mounted.
Triple Shield Protection
Shield One: Glare
Glare is light reflecting off the glass before it reaches the image underneath, so the only real fix is removing that light above the phone. A 25 centimeter canopy does exactly that.
The silver coating on the underside of the canopy stops light passing through the fabric, which is the difference between real shade and a bright translucent patch.
The bendable arm is what makes the coverage reliable. You can place the shadow precisely rather than hoping a fixed angle happens to line up.
Shield Two: Heat
A phone in direct sun absorbs solar energy continuously and climbs well above the surrounding air temperature. Once it reaches its thermal limit it dims the screen and slows the processor.
Keeping the device in shade reduces that solar load, which is the simplest intervention available. The supplier lists outdoor sun protection and cooling among the intended uses.
The magnet holds reliably in heat, so the shade stays on through a long afternoon rather than sliding once things warm up.
Shield Three: Direct Sun
The canopy shades whatever sits beneath it, and at 25 centimeters across that is a usefully large footprint for a phone accessory.
We describe this as shade rather than quoting a sun protection factor. The source listing does not state a UPF or SPF number, so we do not publish one.
Blocking direct sunlight across the covered area is a plain physical claim, and it is the one we are willing to make.
Key Features
- ā Magnetic attachment. Snaps onto a magnetic phone or case in about a second, with no clamping or suction setup.
- ā Bendable metal arm. A metal hose you shape by hand that holds whatever angle you bend it to, then re-bends when the sun moves.
- ā 360 degree finger ring. A rotating ring built into the base that gives a secure one-handed grip while the shade is mounted.
- ā 25 centimeter canopy. A large shaded footprint for a phone accessory, covering the display with room to spare.
- ā Six-rib frame. A proper folding umbrella structure rather than a stiff molded disc.
- ā Silver-coated impact cloth. A reflective underside that blocks light rather than letting it filter through.
- ā Stick-on metal ring included. Lets non-magnetic devices such as tablets and e-readers use the same shade.
- ā About 110 grams. Light enough to carry daily, with 33 centimeters total length from base to canopy.
- ā Folds for carry. The canopy closes and the arm straightens so the unit fits a pocket or a bag.
- ā Nothing on the edges. Back-mounted, so buttons, ports, and the full display stay clear.
Specifications
| Compatible Devices | Magnetic phones and cases; other devices via the included stick-on metal ring |
| Material | Impact cloth canopy with silver coating, metal arm |
| Attachment Method | Magnetic base, plus an adhesive metal ring for non-magnetic devices |
| Coverage Area | Canopy approximately 25 cm in diameter |
| Adjustability | Bendable metal arm holds any shape; finger ring rotates 360 degrees |
| Overall Length | Approximately 33 cm from base to canopy |
| Weight | About 0.11 kg / 0.25 lb |
| Frame | Six ribs on a folding frame |
| Included in Box | One magnetic phone umbrella sun shade and one stick-on metal ring |
How It Compares
| Feature | Gorilla Cases | Competitor A | Competitor B |
|---|---|---|---|
| Attachment | Magnetic | Edge clamp | Suction cup |
| Arm type | Bendable metal | Fixed hinge | Fixed stem |
| Canopy diameter | About 25 cm | About 20 cm | About 16 cm |
| Integrated grip | 360 degree ring | None | None |
| Setup time | About one second | Several seconds | Needs a clean surface |
| Works on non-magnetic devices | Yes, with included ring | Yes | Only on smooth backs |
| Blocks buttons or ports | No | Sometimes | No |
| Weight | About 110 g | About 60 g | About 88 g |
Who This Is For
Beach and Poolside
You are lying out with the phone in one hand, and the screen has become a mirror of the sky. Nothing on it is readable without turning over.
The Magnetic Phone Umbrella Sun Shade with Finger Ring snaps on instantly and the bendable arm puts the shadow exactly where you need it as you shift position. The finger ring means you can hold the phone one-handed with the canopy mounted.
It folds down and goes back in the bag when the sun drops.
Delivery and Rideshare Drivers
Between stops, the phone sits in the sun and the screen washes out right when you need to read the next address or confirm a drop-off photo.
Use this at the curb rather than while driving, since the supplier specifically advises against mounting it in a moving vehicle. Parked, the magnet makes it a one-second operation between runs.
Shading the phone also slows the heat buildup that makes devices throttle during long shifts.
Outdoor Photographers
Judging exposure and focus on a phone screen in open sun is close to impossible, and a washed-out preview leads to shots you only discover are wrong later.
The bendable arm lets you place shade over the viewfinder at whatever angle you are shooting from, including low and overhead positions where a fixed hinge gives up. The included metal ring extends the same shade to a tablet used as a monitor.
The finger ring doubles as a secure grip during handheld video.
Setup and Troubleshooting
- Check your phone for a magnet. A magnetic phone or a case with a built-in magnetic metal ring will hold the base directly. If yours has neither, use the included stick-on ring.
- Fit the metal ring if needed. Clean the back of the case, peel the backing, and press the ring on firmly. Note that this ring is not compatible with wireless charging, so place it where it will not interfere.
- Snap the base on. Bring the magnetic base near the center of the ring and let it pull itself into position. Give it a small twist to confirm it has seated.
- Open the canopy. Push the runner up the shaft until the six ribs lock out, the same motion as a full-size umbrella.
- Bend the arm to aim the shade. Shape the metal hose so the canopy leans toward the sun, then check where the shadow actually lands and adjust until the whole display sits inside it.
- Close and straighten before packing. Furl the canopy and straighten the arm so neither gets deformed by the rest of your bag.
Troubleshooting
The magnet feels weak. A thick or non-magnetic case is the usual cause, since case thickness reduces magnetic hold sharply. Use the included metal ring on the outside of the case instead.
The arm droops under the canopy. Shorten the effective reach by bending the arm into a tighter curve, which brings the canopy weight closer to the base.
The shade misses the screen. The canopy is likely too upright. Bend the arm so the canopy leans further toward the sun until the shadow crosses the display.
Wireless charging stopped working. The stick-on metal ring blocks wireless charging by design. Remove the phone from the shade and the ring before charging on a pad, or charge by cable.
The ribs will not lock out. Fabric has probably caught between the ribs during folding. Close the canopy fully, free the fabric by hand, and open slowly.
Bundle and Save
Solo
One Magnetic Phone Umbrella Sun Shade with Finger Ring. The right starting point if you want to check the magnetic hold on your own phone and case first.
Duo
Two units at a lower per-unit cost than buying singly. This is where most people land, because the second metal ring usually ends up on a tablet or a partner phone.
Trio
Three units at the lowest per-unit cost in the range. Sized for a family trip or a crew who all want their own rather than passing one around.
Save on Your Order
Use code 10OFF at checkout.
Spend $50+ and get a Free Screen and Camera Lens Kit.
Questions before you order? Call us at (978) 797-0223.
Frequently Asked Questions
Does the Magnetic Phone Umbrella Sun Shade with Finger Ring work without a magnetic case?
Yes. The Magnetic Phone Umbrella Sun Shade with Finger Ring includes a stick-on metal ring you attach to the back of a case or device, which gives the magnetic base something to grip.
Which phones does the Magnetic Phone Umbrella Sun Shade with Finger Ring fit?
The Magnetic Phone Umbrella Sun Shade with Finger Ring attaches to any phone with a built-in magnetic ring or a magnetic case, and to anything else via the included metal ring. It is not sized to a specific model.
How large is the canopy on the Magnetic Phone Umbrella Sun Shade with Finger Ring?
The canopy on the Magnetic Phone Umbrella Sun Shade with Finger Ring is approximately 25 centimeters in diameter, with a total length of about 33 centimeters from the base to the top of the canopy.
Can the arm on the Magnetic Phone Umbrella Sun Shade with Finger Ring be adjusted?
The Magnetic Phone Umbrella Sun Shade with Finger Ring uses a bendable metal hose rather than a fixed hinge, so you shape it by hand and it holds that shape. You can re-bend it as often as the sun moves.
What is the Magnetic Phone Umbrella Sun Shade with Finger Ring made of?
The canopy of the Magnetic Phone Umbrella Sun Shade with Finger Ring is impact cloth with a silver coating, on a six-rib folding frame. The adjustable arm is metal.
Does the Magnetic Phone Umbrella Sun Shade with Finger Ring have a UPF rating?
We do not publish a UPF or SPF number for the Magnetic Phone Umbrella Sun Shade with Finger Ring because the source listing does not state one. The silver-coated canopy blocks direct sunlight across the area it covers.
Will the Magnetic Phone Umbrella Sun Shade with Finger Ring keep my phone cooler?
Shading the device reduces the solar energy it absorbs and slows heat buildup, and the supplier lists cooling among the intended uses. The Magnetic Phone Umbrella Sun Shade with Finger Ring is passive shade, so it will not cool a phone below the surrounding air temperature.
Can I use the Magnetic Phone Umbrella Sun Shade with Finger Ring in my car?
The supplier does not recommend using the Magnetic Phone Umbrella Sun Shade with Finger Ring in a vehicle, and we agree. Anything mounted on a dash-held phone can obstruct your view, so set it up only when parked.
Does the Magnetic Phone Umbrella Sun Shade with Finger Ring affect wireless charging?
The included stick-on metal ring is not compatible with wireless charging. Remove the Magnetic Phone Umbrella Sun Shade with Finger Ring and the ring before using a charging pad, or charge by cable instead.
What does the finger ring on the Magnetic Phone Umbrella Sun Shade with Finger Ring do?
The ring built into the base of the Magnetic Phone Umbrella Sun Shade with Finger Ring rotates a full 360 degrees and gives you a secure one-handed grip. It is useful because a back-mounted accessory changes how the phone balances in your hand.
How strong is the magnet on the Magnetic Phone Umbrella Sun Shade with Finger Ring?
The magnetic base of the Magnetic Phone Umbrella Sun Shade with Finger Ring is designed to hold securely on a magnetic phone or case, and the supplier notes that solar heat does not weaken the attraction. Thick or non-magnetic cases reduce the hold, which is what the included metal ring is for.
Can the Magnetic Phone Umbrella Sun Shade with Finger Ring be used on a tablet or e-reader?
Yes. Stick the included metal ring on the back of a tablet, e-reader, or handheld console and the Magnetic Phone Umbrella Sun Shade with Finger Ring will attach to it, though canopy coverage on a large screen is partial.
Does the Magnetic Phone Umbrella Sun Shade with Finger Ring block the screen?
The extended arm on the Magnetic Phone Umbrella Sun Shade with Finger Ring is designed so the canopy clears the display rather than sitting across it. If the arm enters your sightline, bend it around to approach from a different side.
How heavy is the Magnetic Phone Umbrella Sun Shade with Finger Ring?
The Magnetic Phone Umbrella Sun Shade with Finger Ring weighs about 110 grams, or roughly a quarter of a pound. It folds down for carry in a pocket or a bag.
How do I clean the Magnetic Phone Umbrella Sun Shade with Finger Ring?
Wipe the canopy of the Magnetic Phone Umbrella Sun Shade with Finger Ring with a damp cloth and let it air dry fully open before folding. Keep the magnetic base free of grit so it seats flat against the ring.
Keep Reading
Browse the rest of our outdoor and everyday carry range in the Gear collection.
For more on screen finishes and outdoor visibility, read Gorilla Cases Glass Screen Protectors.
If your phone spends its life outside, Top 5 Military-Grade Cases for the Galaxy S23 Ultra looks at the case side of the same problem.