Ships from the USA
Screen + Lens Kit
SSL encrypted
Specifications ▾
Shipping ▾
Returns ▾
Description
The Case Your Moto Razr 2026 Has Been Waiting For
A flip phone lives a double life. Closed, your Moto Razr 2026 is a tough little square with a cover display doing the everyday work — notifications, music controls, quick selfies with the main cameras. Open, it is a full-size smartphone with a tall folding screen and a precision hinge in the middle of everything. The Moto Razr 2026 Magnetic Case – Built-In Glass is engineered for both lives at once. Hard polycarbonate shells armor each half, a built-in cover screen protector with full-edge touch keeps the outer display flawless, an internal spring hinge cover snaps back over the fold automatically, and an N52 enhanced magnetic ring locks onto MagSafe-style chargers, car mounts, wallets, and power banks. Finished with a skin-friendly oil-spray coating in Black or Green, it delivers true 360-degree protection without burying the Razr's slim folded profile. This is the do-everything magnetic case your flip phone has been asking for.
10 Key Features
- N52 enhanced magnetic ring: Built-in N52-grade magnets give a strong, confident snap to magnetic power banks, car mounts, wallets, and wireless chargers — no fumbling for alignment.
- Built-in cover screen protector: The protector is integrated into the top shell with full-edge touch response, so swipes that start at the screen edge still register perfectly.
- Auto snap-back hinge spring: An internal spring mechanism pulls the hinge cover into place the moment you fold the phone, sealing the gap against dust and pocket debris.
- True 360-degree protection: Top shell, bottom shell, hinge cover, and screen protection combine to cover every exterior surface of the clamshell.
- Oil-spray skin-friendly finish: A soft-touch coating feels warm in hand, resists fingerprints, and adds grip compared to bare glossy plastic.
- Hard polycarbonate construction: Rigid PC shells shrug off scratches, flex, and daily impacts while staying lightweight.
- Shockproof corner structure: Reinforced corners absorb and spread drop energy before it reaches the folding display or hinge.
- Raised camera protection: Elevated lips around the dual camera ring keep the lenses lifted off any surface.
- Charging-friendly design: Wireless charging and magnetic accessories work right through the case — never peel it off to power up.
- Three-generation fit: Compatible with the Moto Razr 2026, Razr 2025, and Razr 2024; not for the Razr+ / Plus or Ultra.
Materials & Specifications
The shells are molded from hard polycarbonate (PC) and finished with an oil-spray coating that is smooth, grippy, and resistant to fingerprints. The built-in cover screen protector is optically clear with full-edge touch sensitivity, and the hinge cover is driven by an internal metal spring that snaps back automatically with every fold. The magnetic ring uses N52-grade magnets — among the strongest commonly used neodymium grades — positioned to the MagSafe layout. Added thickness is approximately 2.3 mm per side (estimated) and added weight roughly 42 g (estimated). Available in Black and Green. Compatibility: Motorola Razr 2026, Razr 2025, and Razr 2024 only; the Razr+ / Plus and Ultra use different dimensions. Each package includes the two-piece case with integrated screen protection and hinge cover. See the full lineup in our Moto Razr case collection.
5 Real-World Use Cases
- The road warrior: Snap the Razr onto a magnetic vent mount, navigate, then pull it off one-handed at the destination — the N52 ring holds firm through potholes.
- The minimalist: A magnetic wallet on the back of the case replaces a billfold; phone, cards, and protection ride in one pocket.
- The battery-anxious traveler: Magnetic power banks cling straight to the ring for top-ups in airports and on trains, no cable spaghetti required.
- The outdoor texter: Dust, sand, and lint are a folding phone's enemies — the snap-back hinge cover seals the fold shut on beaches, trails, and worksites.
- The style-conscious upgrader: The Green colorway with its soft-touch finish looks intentional, not tactical, while still carrying full-body armor.
Features & Benefits at a Glance
| Feature | Benefit |
|---|---|
| N52 magnetic ring | Strong hold for chargers, mounts, wallets, and power banks |
| Built-in screen protector | Cover display protection with full-edge touch, zero install effort |
| Snap-back hinge spring | The fold is sealed automatically, every time |
| 360-degree coverage | Every exterior surface of the clamshell is protected |
| Oil-spray finish | Warm, grippy feel that resists fingerprints |
| Hard PC shells | Scratch and impact resistance without bulk |
| Raised camera lips | Lenses stay off the table and out of harm's way |
| Two color options | Black for stealth, Green for personality |
Installation Guide
1. Clean both halves of your Razr with a microfiber cloth, paying special attention to the cover screen. 2. Open the phone flat and clip the bottom shell over the lower half, starting from the USB-C end and pressing each corner until it clicks. 3. Align the top shell so the built-in screen protector sits squarely over the cover display, then press the corners down in a cross pattern. 4. Fold the phone slowly and watch the hinge cover spring into position over the fold. 5. Run a fingernail around all edges to confirm full seating, fold and unfold three times to bed in the spring, then test the cover screen touch response and snap on a magnetic accessory to verify ring alignment.
Troubleshooting
Hinge cover does not snap back fully: Open and close the phone several times to seat the spring, and check that no lint is caught in the hinge channel. The action smooths out within the first dozen folds.
Magnetic accessories feel weaker than expected: Confirm the accessory is MagSafe-standard and attach it from the center of the ring outward. Thick add-on grips or stickers between case and accessory will reduce hold.
Edge swipes on the cover screen feel inconsistent: Make sure the top shell is pressed fully home at all four corners; a corner sitting 1 mm proud can lift the protector edge off the glass.
Case looks smudged out of the box: The oil-spray coating can show packing marks at first — a quick wipe with a dry microfiber cloth restores the uniform soft-touch look.
Shells will not clip together around the phone: Verify your model. This case fits the standard Razr 2026, 2025, and 2024 — not the Razr+ / Plus or Ultra. If you need help, message us through the Contact page.
Frequently Asked Questions
Which Razr models does this fit? The Motorola Razr 2026, Razr 2025, and Razr 2024. It does not fit the Razr+ / Plus or Razr Ultra.
What does the N52 in the magnetic ring mean? N52 is one of the strongest standard neodymium magnet grades, giving a noticeably firmer snap than generic magnetic cases.
Is the screen protector already installed? Yes — it is built into the top shell with full-edge touch response. There is nothing to align and no bubbles to squeeze out.
Does wireless charging work through the case? Yes, both Qi pads and MagSafe-style chargers up to 15W work with the case on.
Will it hold a magnetic wallet? Yes. The N52 ring supports magnetic wallets, car mounts, ring stands, and battery packs.
How does the hinge cover work? An internal spring automatically pulls the cover over the hinge as you fold the phone and retracts it as you open — no manual sliding.
Does it protect the inner folding display? Closed, the clamshell design protects the main screen completely. Never apply rigid glass to the inner folding display; it ships with factory film designed to flex.
How much weight does the case add? About 42 g (estimated), with roughly 2.3 mm (estimated) of added thickness per side.
What colors can I choose? Black and Green, both with the same soft-touch oil-spray finish.
Will the magnets hurt my phone or cards? No. The ring follows the MagSafe layout, which is safe for the phone. Keep hotel keycards and magnetic-stripe cards away from any magnet array, including this one.
Can I use the cover cameras for selfies with the case on? Yes — the camera opening is cut 1:1, and the raised lip protects the lenses without entering the frame.
How fast is shipping? Free USA shipping — most orders arrive in under a week.
Is there a discount code? Yes — enter 10OFF at checkout on gorillacasestore.com for 10% off.
What is the return process? To start a return, reach out through the contact page at gorillacasestore.com. If your return is accepted, we'll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
Does the case affect call or signal quality? No — polycarbonate is radio-transparent and the magnet ring sits clear of the antenna lines, so calls, 5G, NFC, and GPS work normally.
Keep Reading: Gorilla Cases Guides
Still comparing? Check out our Moto Razr 2026 MagSafe kickstand case review for the version with a built-in stand, or our Moto Razr 2026 hot pink slim case review if you want maximum style at minimum thickness.
Join the Gorilla Family
Strong magnets, sealed hinge, glass-guarded cover screen — the Moto Razr 2026 Magnetic Case – Built-In Glass is flip-phone protection done right. Grab yours in Black or Green, stack code 10OFF for 10% off, and let free USA shipping bring it to your door. The Gorilla Family has your Razr's back — both halves of it.