iPhone X Metal Heavy Duty Waterproof Aluminum Case

Why the iPhone X Metal Heavy Duty Waterproof Aluminum Case Is Essential for Adventurers and Outdoor Workers

Picture your iPhone X slipping out of your kayak pocket and disappearing under the surface of the lake. For most phones, that is the end of the story. With this metal heavy duty waterproof aluminum case, you reach down, pull it out, wipe it off, and keep filming. The iPhone X and iPhone XS (2017–2018, 5.8-inch Super Retina display) are still beloved daily drivers — and a phone you love deserves a case that lets it go anywhere you do.

This case seals your iPhone X or XS inside a three-layer fortress: a soft TPU core, a rigid aluminum metal plate, and a screw-on bumper that locks the whole assembly watertight to IP68 standards — submersible up to 10 ft / 3 m for a full 2 hours. Built for swimmers, kayakers, construction workers, beach parents, and anyone whose weekends involve water, mud, or dust, this is the best iPhone X waterproof metal case for life outside the office. Welcome to the Gorilla Family.

Key Features

• 4 color choices: Black, Camo, Red, and Yellow — from stealthy to search-and-rescue visible.
• Premium materials: shock-absorbing TPU inner layer, aircraft-grade aluminum plate, and a screw-on sealing bumper.
• Case type: full-body sealed waterproof case with screw-secured frame — nothing snaps loose by accident.
• IP68 waterproof rating: fully submersible up to 10 ft / 3 m for 2 hours; sealed against water, dust, dirt, and sand.
• Underwater photography: the sealed lens window stays optically clear, so you can shoot photos and video while submerged.
• Included hand strap: loops around your wrist so a wet, slippery phone never gets the chance to swim solo.
• Screen protection: a built-in front membrane covers the entire display while keeping full touch sensitivity.
• Camera protection: recessed, sealed cutouts shield the dual-lens camera from impacts and grit.
• Military-grade drop protection: the three-layer build is rated for drops up to 10 ft / 3 m — shockproof and shatter-resistant in extreme conditions.
• Charging compatibility: Qi wireless charging works through the sealed back, and the gasketed port cover opens for Lightning cables. This is NOT a MagSafe case — the iPhone X and XS predate MagSafe entirely.
• Compatibility: fits the iPhone X (2017) and iPhone XS (2018) ONLY — both share the same 5.8-inch body. It does NOT fit the iPhone XS Max, iPhone XR, iPhone 11 series, or iPhone 8 / 8 Plus.

Materials Explained — What Aluminum Armor and Sealed TPU Actually Feel Like

The aluminum plate at the heart of this case comes from the same alloy family used in aircraft fuselages and dive housings — thin, rigid, and nearly impossible to flex by hand. It gives the case its cool, solid, machine-shop feel and spreads impact force across the whole back panel instead of letting it concentrate on one corner.

Wrapped around your phone is a TPU layer — the same rubbery polymer used in running shoe soles and hockey puck rims. It cushions drops, seals out water at every seam, and gives the grip a slightly tacky confidence that polished metal alone cannot. The screw-on bumper clamps everything together like a watch back, which is exactly why this case stays sealed when snap-on cases pop open.

Altogether the case weighs about 3.5 oz (99 g) and adds roughly 4 mm of thickness — real armor with real numbers, and still pocketable in jeans or a jacket.

Browse More iPhone X and XS Cases

Want something slimmer for the office week and armor for the weekend? Browse the full iPhone X / XS cases collection, shop now and find the right protective phone case for your lifestyle.

Real-World Use Cases

• The Kayaker: clips the hand strap to her vest and films every rapid — the case has been dunked a hundred times and the phone has never felt a drop.
• The Pool Parent: sits at the edge of swim lessons with total peace of mind; splashes, cannonballs, and one full submersion later, the phone is fine.
• The Construction Foreman: works in dust, rain, and concrete slurry; the sealed body keeps grit out of the speakers and the aluminum plate shrugs off dropped tools.
• The Beach Vacationer: shoots underwater video at the reef in the Yellow version — easy to spot on the sand, impossible to ruin in the surf.
• The Gift-Giver: knows someone who loves their iPhone X too much to upgrade — a case that makes an older phone adventure-proof is the most practical gift on the list.

Feature-to-Benefit Mapping

Step-by-Step Installation Guide

1. Clean your iPhone X or XS with a microfiber cloth and remove any existing screen protector — the built-in membrane needs direct contact with the glass.
2. Unscrew the bumper frame and separate the front and back halves of the case.
3. Lay the phone face-down into the front half, aligning the camera with the sealed lens window.
4. Fit the back half over the phone, check that the rubber gasket sits evenly all the way around, and tighten the screws in a criss-cross pattern.
5. Before any water use, do a 30-minute dry test: submerge the empty-pocket case (or the cased phone with a paper towel inside on first assembly) and check for moisture, then test buttons, Lightning charging, and the cameras.

Troubleshooting and Tips

• Touchscreen feels less responsive underwater? That is physics, not a defect — capacitive screens struggle through water. Use the volume buttons as shutter keys for underwater photos.
• Audio sounds slightly muffled? The sealed speaker membranes trade a little volume for total waterproofing. Pop the port cover open (when dry) for calls that need maximum clarity.
• Wireless charging slow or not connecting? Center the phone carefully on the pad — the extra case thickness narrows the alignment sweet spot. Remove thick pad sleeves if charging stalls.
• Fogging inside the lens window? Assemble the case in a dry room, not a steamy bathroom — trapped humid air is what fogs. Re-seat the gasket and reassemble somewhere cool and dry.
• Cleaning after salt water? Rinse the sealed case in fresh water and towel dry before opening. Avoid alcohol wipes on the gaskets and coated finish — they dry out the seals over time.

FAQs

Which phones does this case fit?
It fits the iPhone X (2017) and iPhone XS (2018) only — they share the same 5.8-inch body. It does NOT fit the iPhone XS Max, iPhone XR, iPhone 11, 11 Pro, or iPhone 8 / 8 Plus. Check your model in Settings > General > About before ordering.

What comes in the box?
The waterproof case (front and back halves with screw-on bumper), a hand strap, the installation tool for the screws, and quick-start instructions.

How waterproof is it, exactly?
IP68 rated: fully submersible up to 10 ft / 3 m for up to 2 hours. That covers swimming pools, lakes, beaches, rainstorms, and accidental toilet incidents with room to spare.

Can I take photos and video underwater?
Yes — the sealed lens window is optically clear. Use the volume buttons as the shutter, since touchscreens respond poorly under water.

What is the drop protection rating?
The three-layer TPU, aluminum, and bumper construction is rated for drops up to 10 ft / 3 m onto hard surfaces — military-grade shockproof performance.

Does wireless charging work through the case?
Yes — Qi wireless charging works through the sealed back panel, though alignment matters more than with a naked phone. Wired Lightning charging works through the gasketed port cover. This is not a MagSafe case; the iPhone X and XS predate MagSafe.

Does Face ID still work?
Yes. The front membrane is precision-cut around the TrueDepth notch, so Face ID unlocks normally — though, like all phones, it will not scan your face underwater.

Are the buttons and ports accessible?
Yes. Sealed button covers keep the power and volume keys fully clickable, and the Lightning port sits behind a waterproof gasket cover that flips open in seconds.

Do I need a separate screen protector?
No — a full-coverage screen membrane is built into the case. In fact, you should remove aftermarket protectors before installing so the membrane sits flush.

What is the hand strap for?
It loops around your wrist so a wet or gloved grip never costs you the phone — especially useful on boats, ski lifts, and hiking scrambles.

Will the case yellow or corrode over time?
No. The aluminum plate is anodized against corrosion (rinse after salt water), and the colored TPU does not yellow the way clear cases do.

Is it overkill for everyday use?
If your everyday includes job sites, kids, boats, or bad luck — no. Plenty of Gorilla Family members wear it daily and simply stop thinking about rain, sinks, and pavement.

Is this a good gift?
Yes — it is the classic gift for the outdoorsy person still rocking an iPhone X or XS, and free 30-day returns cover you if they would rather have a different color.

Should I test it before swimming with my phone?
Yes — always. Assemble the case empty or with a paper towel inside, submerge it for 30 minutes, and check for moisture. Reseat the gasket if you see any. Sixty seconds of testing protects a thousand-dollar phone.

What is the return policy?
Yes — Gorilla Cases offers free 30-day returns on all iPhone X cases. If the case doesn't fit your iPhone X or you're not satisfied, contact our team within 30 days for a fast replacement or full refund. No restocking fees.

Why Gorilla Cases?

Gorilla Cases exists because phones got fragile while life stayed rough. The Gorilla Family trusts us because we drop-test and dunk-test every design, describe honestly — right down to telling you the touchscreen will fight you underwater — and back every case with free 30-day returns. Seal it up and go get wet. Shop now at gorillacasestore.com

Read More From Gorilla Case Blogs

Still weighing your options for this generation of iPhone? Read The Best iPhone X Cases: Ultimate Gorilla Cases Guide, then check out Best iPhone XS Cases: Rugged, Slim, Shockproof Options for Daily Use.