Ships from the USA
Screen + Lens Kit
SSL encrypted
Specifications ▾
Shipping ▾
Returns ▾
Description
Why the iPhone 8 Plus Batman Case Is Essential for Comic Fans and Hard-Living Phone Owners
Picture pulling your phone out at the comic shop counter and watching the room notice: angular bat-wing styling machined into aviation-grade aluminum, a metal skeleton wrapped 360 degrees around your iPhone 8 Plus like its own exoskeleton. The R-JUST Batman case is not a printed sticker on plastic — it is sculpted metal armor that is hard as rock and light as a feather, sealed against dust, snow, and drops to IP-68 grade standards. Built for comic collectors, night-shift workers, motorcyclists, gamers, and anyone who wants their Apple iPhone 8 Plus (2017, 5.5-inch Retina display) protected with genuine presence, this is the best iPhone 8 Plus Batman metal case you can put on the phone. Welcome to the Gorilla Family.
Key Features
- Sculpted Batman design: angular bat-wing geometry machined into the metal body — a super cool, fashion-forward look that no printed case can match.
- Premium materials: top aviation aluminum with a metal skeleton body — minimum density, maximum hardness: strong as rock, light as a feather.
- Case type: full-metal 360-degree armor — the frame wraps the entire phone for comprehensive anti-scratch and anti-impact protection.
- Sealed against the elements: water resistant, dust proof, and snow proof — sealed from dirt, dust, snow, and ice to meet or exceed IP-68 ingress standards.
- Seven-layer protection: drop proof and shockproof construction rated for falls of 10 ft / 3 m onto hard surfaces.
- Screen guard ready: works with an HD-clear scratch-resistant screen guard to complete the protection — honestly noted: the screen protector is SOLD SEPARATELY.
- Camera protection: the machined cutout recesses the dual camera below the aluminum surface so the lenses never touch down.
- Charging compatibility: the port opening fits Apple Lightning cables and narrow MFi-certified connectors only. Qi wireless charging is unreliable through metal armor — charge by cable. This is not a magnetic case and does not add MagSafe.
- Functional silent switch: line up the case's toggle with the phone's mute switch during assembly and it works perfectly.
- Honest home-button note: the home key clicks through the case, but Touch ID fingerprint reading is not supported while closed — plan on passcode unlock.
- Compatibility: fits the Apple iPhone 8 Plus (2017, 5.5-inch) ONLY. It does NOT fit the iPhone 8, iPhone 7, iPhone 7 Plus, iPhone X, or iPhone SE.
Materials Explained — What Aviation Aluminum and the Metal Skeleton Actually Feel Like
Aviation aluminum is the alloy family used in aircraft frames and racing components — chosen because it delivers rock hardness at feather weight. In hand, the case is cool and rigid, with machined edges that follow the perfect body curve of the iPhone 8 Plus.
The metal skeleton design means the structure itself absorbs impact: instead of foam padding doing the work, the geometry of the frame spreads a corner strike across the entire shell.
The bat-wing detailing is cut into the metal, not printed on it — so the design wears like an engraving, not a decal.
Altogether the case weighs about 3.2 oz (90 g) and adds roughly 3.5 mm of thickness — a featherweight figure for sculpted, full-metal 360-degree armor.
Browse More iPhone 8 Plus Cases
Want to compare it with our Extreme armor or a slim daily case? Browse the full iPhone 8 Plus Cases collection, shop now and find the right protective phone case for your lifestyle.
Real-World Use Cases
- The Comic Collector: the phone finally matches the shelf — sculpted metal beats a printed TPU skin every time.
- The Motorcyclist: tank-bag vibration and fuel-stop fumbles are no match for aviation aluminum.
- The Night-Shift Worker: loading docks, pallet jacks, and concrete floors — the 10 ft / 3 m rating covers the whole shift.
- The Winter Commuter: snow, ice, and road salt stay outside the IP-68 grade seal.
- The Gift-Giver: the rare present that is both a fandom statement and serious protection — an easy win for any Batman fan with an 8 Plus.
Feature-to-Benefit Mapping
| Feature | Benefit |
|---|---|
| Aviation aluminum metal skeleton | Survives 10 ft / 3 m drops while staying feather-light |
| 360-degree wraparound frame | Anti-scratch, anti-impact coverage on every face and corner |
| IP-68 grade sealing | Water, dust, dirt, snow, and ice stay outside |
| Machined bat-wing design | A collector-grade look that cannot peel, fade, or rub off |
| Slim 3.5 mm added profile at 3.2 oz / 90 g | Statement armor that still pockets comfortably |
Step-by-Step Installation Guide
- Clean your iPhone 8 Plus with a microfiber cloth and remove any existing screen protector — the case needs a bare screen for touch sensitivity and a tight fit.
- Lay the phone into the rear half of the metal frame, aligning the camera with the recessed cutout.
- Line up the case's silent switch toggle with the phone's mute switch before closing — the one step that makes the toggle work flawlessly.
- Close the front frame and secure the assembly until both halves sit flush with no edge gaps.
- Test the buttons, mute toggle, speakers, and Lightning port (Apple or narrow MFi cable), and set a passcode if you normally use Touch ID.
Troubleshooting and Tips
- Touch ID not reading? Known trade-off — the home key clicks through the case, but the fingerprint sensor cannot scan while sealed. Use your passcode.
- Charging cable will not fit? The port opening is sized for Apple's Lightning cable or narrow MFi plugs — wide aftermarket connectors will not reach.
- Mute toggle not responding? Reopen the case and realign the toggle with the switch — misalignment during assembly is almost always the cause.
- Wireless charger not detecting the phone? Expected — metal blocks Qi. Cable charge or remove the case for the pad.
- Keeping the finish sharp? Wipe with a damp cloth and mild soap, then dry fully. Avoid alcohol wipes — they dull the black metal finish.
FAQs
Which phones does this case fit?
It fits the Apple iPhone 8 Plus (2017, 5.5-inch display) only. It does NOT fit the iPhone 8, iPhone 7, iPhone 7 Plus, iPhone X, or any iPhone SE. The metal frame is machined specifically for the 8 Plus body curve.
What comes in the box?
One R-JUST Batman metal aluminum shockproof case cover for iPhone 8 Plus.
Is a screen protector included?
No — honestly stated, the HD-clear scratch-resistant screen guard is sold separately. The case is designed to work with it for complete protection; pick one up from our screen protector collection.
Is it waterproof?
It is water resistant and sealed from dust, dirt, snow, and ice to meet or exceed IP-68 grade ingress standards. We describe honestly: treat it as weatherproof armor, not a swimming housing.
Does it work with MagSafe or wireless charging?
No. The aluminum body blocks Qi wireless charging, and this is not a magnetic case and does not add MagSafe. Charge through the port with an Apple or narrow MFi Lightning cable.
What is the drop protection rating?
The aviation aluminum skeleton and seven-layer construction are rated for drops of 10 ft / 3 m onto hard surfaces.
Does Touch ID work with the case on?
No — the home key clicks through the case, but fingerprint reading is not supported while closed. Plan on passcode unlock.
Are buttons and ports accessible?
Yes — easy access to all buttons, controls, the camera, speaker, and microphone with the case installed.
Is the Batman design printed or engraved?
The bat-wing geometry is machined into the aluminum itself — it cannot peel, fade, or rub off the way printed designs do.
How heavy is it?
About 3.2 oz / 90 g — genuinely light for full-metal armor thanks to the minimum-density aviation alloy.
Is there a lanyard or strap option?
No lanyard hole on this model — see our phone rings and straps accessories if you want a tether.
Is it professional enough for work?
It is a statement piece — sleek black metal first, bat-wing details second. Most people read it as a premium armored case before they spot the design.
Is it a good gift?
For the Batman fan still running an iPhone 8 Plus, it might be the single best gift on this site — and free 30-day returns cover the fit risk.
Will the black metal finish wear?
Corners can burnish to bare aluminum after years of hard use — which, frankly, only adds to the vigilante aesthetic. Nothing peels or flakes.
What is the return policy?
Yes — Gorilla Cases offers free 30-day returns on all iPhone 8 Plus cases. If the case doesn't fit your iPhone 8 Plus or you're not satisfied, contact our team within 30 days for a fast replacement or full refund. No restocking fees.
Why Gorilla Cases?
Gorilla Cases believes protection should never be boring. The Gorilla Family trusts us because we drop-test every design on real concrete and describe honestly — including what a sealed metal case gives up in Touch ID and wireless charging. Every case ships with free 30-day returns. Armor up the 8 Plus; the night is dark and the pavement is hard. Shop now at gorillacasestore.com
Read More From Gorilla Case Blogs
Want more on metal armor? Read the iPhone 14 Pro Aluminum Tactical Metal Case story, or why one customer says a metal case replaced every other case he owns.