Galaxy S22 Ultra Clear Hybrid Bumper Case

Why the Galaxy S22 Ultra Clear Hybrid Bumper Case Suits People Who Want Protection Without Hiding the Phone

You bought a Phantom Black or Burgundy Galaxy S22 Ultra because it looks like nothing else Samsung has made since. Then you wrapped it in an opaque slab and never saw it again. This case is the other answer. It is a two-piece hybrid build: a hard polycarbonate front frame that clips over the edge of the display, and a flexible TPU rear bumper carrying a transparent back panel. The phone stays visible. The corners, edges, screen rim and camera ring do not stay exposed.

The supplier describes it as a shockproof, heavy duty, rugged, dual layer case in PC plus TPU, and publishes two measurements that matter more than most marketing copy does: the camera edge sits 1.23 mm proud of the lens array, and the screen edge sits 1.25 mm proud of the glass. Those are the two numbers that decide whether a face-down drop onto a cafe table ends in a shrug or a repair quote. Everything else on this page is detail around those two lips, the four shock-absorbing corners behind them, and what the clear back lets you keep looking at.

It is built for people who are hard on a phone but still like it: commuters, site visitors, parents, students, anyone whose Galaxy S22 Ultra is now three-plus years old and worth keeping alive rather than replacing. Welcome to the Gorilla Family.

Key Features at a Glance

• Three colours in the Gorilla range: Black, Blue and Pink. The bumper frame carries the colour; the back panel stays clear so your phone's own finish shows through.
• Two-piece hybrid build: the supplier's own exploded diagram labels the front frame PC (polycarbonate) and the rear bumper TPU. Material is listed as PC plus TPU.
• Raised screen edge of 1.25 mm: a measured lip, published by the supplier, that keeps the display glass off flat surfaces in a face-down landing.
• Raised camera edge of 1.23 mm: the rear frame steps up around the S22 Ultra's contoured lens cluster so the glass never rests on the table.
• Shock absorption bumper design: the supplier's product imagery shows reinforced, ribbed corner sections described as a shock absorption bumper design, and the listing calls out reinforced corners and edges.
• Clear back panel: the supplier markets this as crystal clear transparency, so the phone's colour, the Samsung wordmark and any skin underneath remain visible.
• Wireless charging listed by the supplier: wireless charging appears in the listed feature set, so Qi pads are intended to work with the case fitted.
• Anti-scratch, anti-fingerprint, non-slip, dustproof, flexible, lightweight, glossy: the full feature list published by the supplier. No ingress-protection rating is published, so treat dustproof as a texture-and-seal description rather than a tested rating.
• Precise cutouts: the supplier states the case is engineered for a precise fit with cutouts for all ports, buttons and cameras.
• Fits the Samsung Galaxy S22 Ultra, 2022, 6.8 inch. This Gorilla Cases listing covers the Galaxy S22 Ultra only. It does not fit the Galaxy S22, the Galaxy S22 Plus, the Galaxy S21 Ultra or the Galaxy S23 Ultra.

Materials Explained: What PC Plus TPU Actually Means in the Hand

Hybrid is one of the most abused words in phone accessories, so here is what it means on this specific case. Polycarbonate, the PC half, is a rigid engineering thermoplastic. It is the material used for safety eyewear and machine guarding because it resists cracking while staying stiff. On this case the PC forms the front frame: the piece that goes on first, clips around the perimeter of the display, and holds the 1.25 mm screen lip in shape. Stiffness is exactly what you want there. A soft front lip would fold under the phone in a flat drop and let the glass touch down anyway.

Thermoplastic polyurethane, the TPU half, is the rubbery, slightly elastic material used for everything from running-shoe midsoles to industrial cable jackets. It stretches, it rebounds, and it converts impact energy into heat rather than passing it straight through to whatever is behind it. On this case the TPU forms the rear bumper: the coloured rail that runs around the sides and corners, with the clear panel sitting inside it. That is why the corners on the supplier's photography look thicker and ribbed. Corners take the first hit in the overwhelming majority of drops, and TPU is the half of the build that is good at absorbing them.

Put the two together and you get the behaviour that single-material cases cannot manage. An all-TPU case grips well and absorbs well, but flexes enough that it can peel off a corner on a bad bounce. An all-PC case holds its shape perfectly and transmits almost every joule of a drop straight into the phone. The hybrid splits the job: rigid frame for structure and lip geometry, elastic bumper for energy absorption and grip. The supplier labels this dual layer, and badges its own imagery with a 360 degree protection claim.

One honest caveat on clear backs in general, not a knock on this one specifically: transparent panels are the part of any clear case most prone to yellowing over long exposure to ultraviolet light and skin oils. The supplier states the material is resistant to scratches and yellowing. That is the manufacturer's claim and we are passing it on as theirs; no accelerated-ageing test data is published, so we are not going to put a number of months on it.

Browse More Galaxy S22 Ultra Cases

Weighing a clear bumper against a solid rugged shell or a slimmer everyday cover? Browse the full Galaxy S22 Ultra cases collection and compare the whole range side by side before you commit to a style.

Real-World Use Cases

• The commuter. Phone goes in and out of a coat pocket forty times a day, lands screen-down on train tables, gets jostled on platforms. The 1.25 mm front lip is doing quiet work on every one of those table landings.
• The site visitor. Not a full trades day, but enough ladders, tailgates and dusty floors that a bare phone is a bad idea. The TPU rail grips gloved and dry hands, and the reinforced corners take the knocks.
• The parent. The S22 Ultra gets handed over for cartoons and handed back from a height. Shock-absorbing corners and a clear back mean the phone survives and still looks like the phone you bought.
• The phone collector. You chose Burgundy or Green deliberately. A clear back is the only case style that lets you keep protection and keep the colour at the same time.
• The student. Backpack, lecture hall desk, library table, dorm floor. Cheap to replace is not the point when the phone is a legacy flagship that still takes better photos than most new mid-rangers.
• The long-hauler. Your S22 Ultra is three-plus years old and running fine. Keeping the screen and camera glass pristine is what makes year four and year five painless.

Feature-to-Benefit Mapping

Specifications and What Is in the Box

Where a figure is not published by the manufacturer we say so rather than filling the gap. If a spec you need is missing here, it is missing because it is missing from source, not because we left it out.

Step-by-Step Installation Guide

1. Wipe the Galaxy S22 Ultra down with a dry microfibre cloth, front and back. Dust trapped under a clear panel is visible forever and is the single most common complaint about every clear case ever made.
2. Separate the two pieces if they arrive assembled. The PC front frame lifts away from the TPU rear bumper; work around the perimeter rather than prising at one point.
3. Seat the phone into the TPU rear bumper first, back of the phone against the clear panel. Start at the bottom edge, then stretch the TPU over the top two corners.
4. Check the camera cutout alignment before you go further. The contoured S22 Ultra lens array should sit centred in the opening with the raised rim clear of all lenses.
5. Clip the PC front frame over the assembled rear, again starting at one short edge and working around. You should hear it seat along each side.
6. Run a fingernail around the whole perimeter to confirm there is no gap between the two pieces, then test the volume rocker, the side key, the USB-C port, the speaker and the microphones.
7. Finally, lay the phone face down on a flat table and give it a gentle press. The screen should not touch the surface. That is the 1.25 mm lip doing its job and it is worth confirming once.

Care, Cleaning and Keeping the Clear Panel Clear

• Clean it monthly, not yearly. Pop the two pieces apart, rinse under lukewarm water with a drop of mild dish soap, and dry fully before reassembly. Trapped moisture is worse than trapped dust.
• Skip the alcohol wipes on the clear panel. Solvents haze transparent plastics over time. Soap and water does the job without the trade-off.
• Dust under the panel is a two-minute fix. Separate, wipe both inner faces and the back of the phone, reassemble. No tools required.
• Keep it out of a hot car dashboard. Prolonged heat and direct sunlight are hard on every clear plastic, whatever the stated resistance.
• Air-dry rather than heat-dry. A hairdryer or radiator can warp a thin TPU rail just enough to loosen the fit.

Troubleshooting and Tips

• A corner is lifting. The two pieces have not fully seated. Separate them and reassemble, clipping one short edge first and working around rather than pressing the middle of each side.
• Wireless charging is slow or intermittent. Centre the phone on the pad. A two-layer case shifts the sweet spot, and an off-centre coil is the usual culprit before anything else is.
• Buttons feel stiff out of the box. New TPU covers are firm for the first few days and loosen with use. If a button stays stiff after a week, check the frame is seated rather than bowed over the key.
• You can see dust specks under the clear panel. Normal and fixable. Separate, wipe, reassemble in a low-dust room.
• Swipe-from-edge gestures feel caught. The PC frame sits on the very edge of the S22 Ultra's curved glass. Give it a day. If it still bothers you, a flatter-profile case suits your grip better than this one does.
• Clear panel looks smeared. That is skin oil, not damage. Soap, water, microfibre.

Frequently Asked Questions

Which exact phone does this case fit?
The Samsung Galaxy S22 Ultra, the 2022 model with the 6.8 inch display. That is the only device this Gorilla Cases listing covers. It does not fit the Galaxy S22, the Galaxy S22 Plus, the Galaxy S21 Ultra or the Galaxy S23 Ultra, all of which differ in body dimensions or camera layout.

What comes in the box?
One two-piece case: the hard PC front frame and the TPU rear bumper with its clear back panel. No screen protector, cleaning cloth or installation tool is included. The manufacturer leaves the items-included field blank, so anything beyond the case itself is not specified.

Does wireless charging work with the case on?
Yes, according to the supplier, which lists wireless charging among this case's features. Centre the phone on the pad for the most reliable connection, since a dual-layer case narrows the alignment window compared with a bare phone.

Is this a MagSafe or magnetic case?
No. No magnets or magnetic array are listed anywhere in the supplier's specification, so magnetic mounts and magnetic wallets will not attach to it. If you need magnetic mounting, add a separate adhesive magnet ring or choose a case built around one.

Is the case waterproof?
No. The supplier publishes no IP rating or water-resistance rating of any kind for this case, so there is no basis for calling it waterproof or water resistant. Dustproof appears in the feature list, but with no tested ingress rating behind it we treat that as a design description only.

How far will it survive a drop from?
No drop height or test standard is specified by the manufacturer. The supplier describes the case as shockproof, heavy duty and rugged with reinforced corners and a shock absorption bumper design, and badges its imagery with a 360 degree protection claim, but it publishes no drop-test figure, so we will not invent one.

Does it protect the screen?
Yes, by geometry rather than by covering it. The front frame rises 1.25 mm above the display glass, so a flat face-down landing meets the frame first. The display itself is left open, so this is a raised-lip design, not a built-in screen cover.

Can I use a tempered glass screen protector with it?
Not specified by the manufacturer, and worth testing yourself before committing. The PC front frame clips onto the edge of the S22 Ultra's curved display, which is exactly the area a full-coverage protector occupies, so a thick protector may conflict with the frame. A smaller case-friendly protector is the safer pairing.

Does the in-display fingerprint sensor still work?
Yes. The case leaves the display fully uncovered, so the S22 Ultra's ultrasonic in-display reader works exactly as it does with no case fitted. The front frame sits on the perimeter only, well clear of the sensor area.

Does the case hold the S Pen?
No, and nothing on this case is designed to. The S Pen silo is built into the Galaxy S22 Ultra itself, and this case has no pen loop, slot or holder of its own. S Pen silo clearance is not specified by the manufacturer, so check the eject action once the case is fitted.

Are the buttons and ports accessible?
Yes. The supplier states the case is engineered with precise cutouts for all ports, buttons and cameras. The volume rocker and side key sit under moulded covers that stay tactile, and the USB-C port, speaker and microphones have open cutouts.

Will the clear back turn yellow?
The supplier states the material is resistant to scratches and yellowing. That is the manufacturer's claim and no ageing-test data sits behind it, so we are passing it on as theirs rather than as a guarantee. Keeping the case out of prolonged direct sunlight is the single most effective thing any owner of any clear case can do.

How bulky is it?
Weight and thickness are not specified by the manufacturer. What we can tell you from the construction is that it is a two-layer case with a deliberate 1.25 mm front lip and a 1.23 mm camera step, so it adds noticeably more than a thin snap-on shell and noticeably less than a holster-style armour case.

Which colour should I choose?
Black is the default if you want the case to disappear and the phone to show through the back. Blue is the bright option, a vivid cyan rather than a navy. Pink is a strong rose rather than a pastel. All three keep the same clear rear panel, so your phone's own finish stays visible whichever frame colour you pick.

Is it worth putting a new case on a 2022 phone?
That depends on how long you plan to keep it, and for most S22 Ultra owners the answer is yes. The phone is well past the point where replacement parts are cheap, the camera glass and display are the two most expensive things on it, and a case that keeps both off flat surfaces is a small fraction of a single repair. A clear case also keeps the resale photographs looking like a phone that was cared for.

Why Gorilla Cases, and Where to Read More

Gorilla Cases writes product pages the way we would want one written for us. If the manufacturer publishes a number, you get the number and you get told who published it. If the manufacturer does not publish it, you get told that too, in those words, instead of a confident-sounding figure somebody made up. On this page that applies to the drop rating, the weight, the thickness and the screen-protector compatibility. We would rather lose a sale to an honest gap than win one on an invented spec.

The same rule governs what we leave out. There is no water-resistance claim on this page because no ingress rating exists for this case. There is no military-standard badge because the supplier makes no military-standard claim. There are no customer quotes because we do not have verified ones for this specific case, and inventing them would be worse than having none.

Want to compare before you buy? Read Best Galaxy S22 Ultra Clear Case 2026: Anti-Yellowing Transparency for Samsung's 2022 S Pen Giant, or go heavier with Best Galaxy S22 Ultra Rugged Case 2026: Drop Protection Review. Shop the full range at gorillacasestore.com and welcome to the Gorilla Family.