Galaxy A01 Waterproof Case

Why the Galaxy A01 Waterproof Case Is Essential for All-Weather Commuters and Outdoor Families

Picture your Galaxy A01 sitting in a puddle at the bus stop, exactly where your numb winter fingers dropped it. With this IP68 waterproof case sealed around it, you wipe it on your sleeve and keep scrolling. The compact A01 (2020, 5.7-inch Infinity-V display) disappears into a fully sealed two-piece shell with a built-in screen protector, rated for submersion to 6.6 ft / 2 m for 30 minutes and drop-tested to 6 ft / 1.8 m. Built for rainy-day commuters, hikers, snow shovelers, jobsite workers, and parents of curious toddlers, this is the best Galaxy A01 waterproof case for turning Samsung's smallest budget phone into a true all-terrain device. Welcome to the Gorilla Family.

Key Features

• Clean, classic colorway: a black sealing frame with a clear, scratch-resistant back panel that shows off your A01.
• Premium materials: polycarbonate shell, shock-absorbing TPU bumper, and silicone gasket seals at every joint.
• Case type: full-body, fully sealed waterproof case — two shells snap together in seconds with no tools.
• IP68 waterproof rating: certified for submersion to 6.6 ft / 2 m for 30 minutes — rain, snow, sinks, and pools included.
• Shockproof frame: drop-tested to 6 ft / 1.8 m with raised edges that keep the screen and camera off the pavement.
• Dustproof and snowproof: tight gasket seals block dust, sand, lint, and powder from every port and seam.
• Screen protection: built-in scratch-resistant screen protector keeps full touchscreen sensitivity.
• Camera protection: anti-reflective clear lens window keeps photos sharp, even underwater.
• Charging compatibility: charge through the sealed Micro-USB port flap without removing the case; this is not a magnetic case and does not add MagSafe, and the Galaxy A01 does not support wireless charging.
• Light and pocketable: at about 1.9 oz / 54 g, it is one of the lightest sealed cases we make — the A01 stays a small phone.
• Compatibility: fits the Samsung Galaxy A01 (2020, 5.7-inch) ONLY. It does NOT fit the Galaxy A01 Core, A02, A02s, A10e, or A11.

Materials Explained — What Polycarbonate and TPU Actually Feel Like

The hard shell is polycarbonate, the same engineering plastic used in bike helmets and aircraft cockpit windows. It gives the case its rigid backbone so the watertight seal cannot flex open when the phone hits the ground, and the clear back panel resists scratches while showing the phone inside.

The bumper zones are TPU (thermoplastic polyurethane), the flexible polymer found in running shoe soles and hockey puck rims. It absorbs impact energy at the corners — where phones actually land — and adds an anti-slip grip that stays secure in wet gloves.

Between the two shells, silicone gasket seals compress as the covers snap together, creating the IP68 barrier that keeps water, dust, and snow on the outside where they belong.

Altogether the case weighs about 1.9 oz (54 g) and adds roughly 2.5 mm of thickness per side — barely noticeable on a phone this compact.

Browse More Galaxy A Series Cases

Outfitting other A-series phones in the family? Browse the full Galaxy A Series case collection, shop now and find the right protective phone case for your lifestyle.

Real-World Use Cases

• The Rainy-Day Commuter: texts through downpours and survives the occasional coffee-cup collision on a crowded train.
• The Winter Hiker: navigates snowy trails with the case shrugging off powder, sleet, and one glove-fumbled drop per outing.
• The Toddler Parent: hands the phone over for cartoons knowing the tub, the dog bowl, and the stairs are all covered.
• The Site Worker: keeps the A01 in a dusty tool belt all week and rinses the case clean on Friday.
• The Gift-Giver: pairs it with a first phone for a kid or a simple phone for grandparents — protection that needs no instructions.

Feature-to-Benefit Mapping

Step-by-Step Installation Guide

1. Clean your Galaxy A01 with a microfiber cloth and remove any aftermarket screen protector for full touch sensitivity.
2. Separate the case into its front and back shells at the corner notch.
3. Place the phone into the front housing, aligning the camera and buttons.
4. Snap the back cover on around all four edges until every latch sits flush with no gaps.
5. Submerge the empty, re-sealed case for 5 minutes with a paper towel inside to confirm the seal, then verify buttons, touch response, and charging.

Troubleshooting and Tips

• Touchscreen feels less responsive? Re-seat the case and press around the screen edges to push out trapped air bubbles between protector and display.
• Camera window fogging? Open the case in a dry room, wipe the inner window with a microfiber cloth, and re-seal away from humidity.
• Muffled call audio at first? The acoustic membrane needs a few days of break-in; clarity improves with normal use.
• Heading out on the water? Re-test the seal monthly and after any major drop — a 5-minute empty-case dunk is cheap insurance.
• Cleaning the case? Rinse with fresh water after saltwater, mud, or dust exposure and dry with a soft cloth — never use alcohol wipes, which degrade the silicone gaskets.

FAQs

Which phones does this case fit?
It fits the Samsung Galaxy A01 (2020, 5.7-inch display) only. It does NOT fit the Galaxy A01 Core, A02, A02s, A10e, or A11 — even small size differences break a watertight seal.

What comes in the box?
The two-piece waterproof case: a front shell with built-in screen protector and a sealed snap-on back shell.

Is it fully submersible?
Yes — IP68 certified for submersion to 6.6 ft / 2 m for 30 minutes. Always confirm the flap is closed and test the seal after any hard drop.

Does it support wireless charging or MagSafe?
The Galaxy A01 does not support wireless charging, and this is not a magnetic case and does not add MagSafe. Charge through the sealed Micro-USB flap without removing the case.

What is the drop protection rating?
The polycarbonate and TPU shell is drop-tested to 6 ft / 1.8 m onto hard surfaces, with raised edges protecting the screen and camera.

Does it work with fingerprint unlock?
The Galaxy A01 does not have a fingerprint sensor — it unlocks by PIN, pattern, or face recognition, and all three work normally through the case.

Are buttons and ports accessible?
Yes — power and volume click through molded covers, and the charging port and headphone jack sit behind sealed flaps you open when needed.

Is the screen protector removable?
No — it is built into the front shell to complete the waterproof seal. Remove any aftermarket protector before installation.

Can I take photos underwater?
Yes — the anti-reflective lens window stays clear at depth. Keep within the rated 6.6 ft / 2 m for 30 minutes and wipe the window before shooting.

Will it yellow or fade?
The hard polycarbonate back resists yellowing far better than soft clear cases. Rinse off sunscreen promptly and avoid alcohol wipes.

Is it bulky?
No — at about 1.9 oz / 54 g and roughly 2.5 mm added per side, it is slimmer than most rugged cases and far slimmer than a dry pouch.

Will it work with a PopSocket or car mount?
Adhesive grips bond inconsistently to the textured back — a cradle-style car mount or magnetic plate inside a vent clamp works better.

Is it a good gift?
It is the classic first-phone companion — affordable, nearly indestructible, and covered by free 30-day returns if it is not the right fit.

How often should I check the seal?
Test monthly with a 5-minute empty-case dunk, and again after any major drop or beach trip. Clean the gaskets gently when you do.

What is the return policy?
Yes — Gorilla Cases offers free 30-day returns on all Galaxy A01 cases. If the case doesn't fit your Galaxy A01 or you're not satisfied, contact our team within 30 days for a fast replacement or full refund. No restocking fees.

Why Gorilla Cases?

At Gorilla Cases we believe the most affordable phone in the lineup deserves the same engineering obsession as a $1,200 flagship. The Gorilla Family trusts us because we drop-test every design, dunk-test every seal, and describe honestly what each case can and cannot do — backed by free 30-day returns on every order. Rain, snow, sand, or sink: bring it on. Shop now at gorillacasestore.com

What Gorilla Family Customers Are Saying

★★★★★
Sink, snow, still going strong
I have dropped my A01 in the kitchen sink and pulled it out of a snowbank this winter, and the phone inside has never seen a drop of water. The built-in protector took a countertop scratch that would have ruined the screen. Unbeatable for the price.
— Karen D., Buffalo, NY

★★★★★
Perfect for my dad's first smartphone
Bought the A01 and this case together for my father, who is not gentle with technology. Eight months later it has survived the garden hose, the truck bed, and a fall down the porch steps. He has stopped asking me about phone insurance.
— Owen C., Calgary, AB, Canada

★★★★★
Rainy site days, no stress
I work outdoor construction and my phone lives in drizzle and concrete dust. The flaps keep the charging port spotless and the case rinses clean every weekend. Touchscreen works fine with the protector, even with damp hands.
— Pete J., Seattle, WA

★★★★★
Hiking in all weather
Took this little phone up four soggy trails this spring — rain, mud, and one slip into a stream crossing. Dried the case on a rock and kept navigating. It is light enough that I forget it is a waterproof case at all.
— Fiona M., Glasgow, UK

★★★★½
Great protection, plan your charging flap routine
The seal is genuinely waterproof — verified with the dunk test and one real bathtub rescue. My only quibble is the Micro-USB flap is snug and takes a fingernail to open every night for charging. A fair trade for a phone that cannot drown.
— Tyler B., Kansas City, MO

Read More From Gorilla Case Blogs

Want to see how we kit out Samsung's budget lineup? Read Why the Galaxy A Series Deserves a Dedicated Case Lineup, then compare everyday picks in Best Galaxy A10e Cases for Everyday Protection and Usability.