iPhone 12 Pro Max Magsafe Waterproof Case with Built in Screen Protector

Why the iPhone 12 Pro Max MagSafe Waterproof Case Is Essential for Swimmers and MagSafe Power Users

Picture filming your kid's first cannonball from inside the pool, then walking back to the car and snapping your iPhone 12 Pro Max straight onto a MagSafe charger — no plugs to open, no case to peel off, no panic about the water still dripping off the shell. That is the whole point of this case. The iPhone 12 Pro Max MagSafe Waterproof Case seals your 6.7-inch flagship (2020) inside an IP68-certified, full-body shell with a built-in screen protector, sealed lens windows for true underwater photos, and full compatibility with MagSafe wireless fast charging straight through the back. Built for swimmers, boaters, beach vacationers, construction workers, and anyone already invested in MagSafe accessories, this is the best iPhone 12 Pro Max MagSafe waterproof case for people who refuse to choose between submersion protection and magnetic convenience. The Gorilla Family does not wait out the weather — and now your iPhone 12 Pro Max does not either.

Key Features

• 2 color choices: Black and Teal — both with the same sealed, scratch-resistant shell and clear lens windows.
• Premium materials: rigid polycarbonate front and back shells, a shock-absorbing TPU perimeter, and a flexible built-in screen membrane.
• Case type: full-body, two-piece snap-together waterproof case — the halves clamp shut to form a 360-degree seal around the phone.
• IP68 waterproof rating: certified submersible to 6.6 ft / 2 m for up to 1 hour — and drop-tested from the same 6.6 ft / 2 m height over 1,000 times.
• MagSafe compatible: the thin sealed back lets MagSafe wireless fast chargers align and charge through the case — no need to break the seal to top up.
• Built-in screen protector: a sealed front membrane blocks water, snow, dust, and scratches while keeping full touch sensitivity for FaceTime, video, and meetings.
• Underwater photography ready: optically clear, sealed lens windows support high-definition photos and video recording underwater.
• Screen protection: raised bezel edges keep the front membrane off tables and pavement on face-down drops.
• Camera protection: the sealed lens plate guards the triple-camera array against sand, grit, and 6.6 ft / 2 m drops.
• Full button access: tactile sealed covers give you full access to all buttons and controls, with a waterproof plug over the Lightning port.
• Compatibility: fits the iPhone 12 Pro Max (6.7-inch, 2020) ONLY. It does NOT fit the iPhone 12, iPhone 12 Pro, iPhone 12 Mini, iPhone 11 Pro Max, or iPhone 13 Pro Max.

Materials Explained — What Polycarbonate and TPU Actually Feel Like

Polycarbonate is the same impact-resistant plastic used in bike helmets and aircraft cockpit windows. Here it forms the front and back shells — the rigid frame that keeps the waterproof gasket compressed evenly around your iPhone 12 Pro Max and takes the scrapes from rocks, concrete, and truck beds without cracking.

TPU (thermoplastic polyurethane) is the flexible, grippy material you know from running shoe soles and hockey puck rims. It wraps the perimeter of this case as a shock-absorbing bumper, soaking up drop energy at the corners where phones actually land and giving wet hands something to hold onto at the pool edge.

The built-in screen membrane feels close to your phone's own glass — thin enough that taps, swipes, and typing register normally, tough enough to absorb the everyday scratches your naked screen would otherwise collect.

Altogether the case weighs about 2.7 oz (77 g) and adds roughly 3.5 mm of thickness — slim enough for a jeans pocket, and thin enough on the back that MagSafe magnets still grab firmly through the shell.

Browse More iPhone 12 Pro Max Cases

Want to weigh this sealed MagSafe shell against wallets, metal armor, and slim covers? Browse our full iPhone 12 Pro Max cases collection, shop now and find the right protective phone case for your lifestyle.

Real-World Use Cases

• The Beach Vacationer: shoots underwater video at the resort, rinses the case at the outdoor shower, and MagSafe-charges on the nightstand — all without opening the seal once.
• The Boater: keeps the phone clipped near the helm for GPS, knowing spray, rain, and a drop overboard in the shallows are survivable events.
• The Construction Worker: drops the phone from a 6.6 ft / 2 m scaffold into mud, hoses it off, and takes the next call.
• The MagSafe Commuter: snaps the sealed phone onto a magnetic car mount every morning — the magnets work straight through the waterproof back.
• The Gift-Giver: needs one present that covers the friend who kayaks on weekends and fast-charges wirelessly on weekdays.

Feature-to-Benefit Mapping

Step-by-Step Installation Guide

1. Clean your iPhone 12 Pro Max with a microfiber cloth so no dust or lint gets trapped under the built-in screen protector.
2. Lay the phone face-down into the front shell, aligning the camera cutout and side buttons first.
3. Place the back shell over the phone and press around the entire perimeter until every latch clicks — work corner to corner.
4. Run a fingernail along the seam to confirm there are no gaps, paying extra attention to the charging port plug.
5. Test all buttons, the speaker, and MagSafe charging — and before any swim, do a 30-minute paper-towel submersion test with the case empty.

Troubleshooting and Tips

• MagSafe charger feels weaker than on a naked phone? Center the magnet ring deliberately — the 3.5 mm shell slightly reduces magnetic grip, so let the charger settle into alignment before walking away.
• Touchscreen feels less responsive after installation? Press gently around the screen edges to release trapped air between the membrane and the glass; sensitivity normalizes within a day.
• Muffled audio on calls? Check that the acoustic membrane vents are clear of sand or lint; a dry soft brush clears them without breaking the seal.
• Seal seems loose after reopening the case? Re-snap the halves starting from the top corners and listen for every latch click — a partial snap is the most common cause of leaks.
• How should I clean it? Rinse with fresh water after pool or ocean use and wipe with a damp cloth — never use alcohol wipes on the coated shell, as they can cloud the finish.

FAQs

Which phones does this case fit?
It fits the iPhone 12 Pro Max (6.7-inch, 2020) only. It does NOT fit the iPhone 12, iPhone 12 Pro, iPhone 12 Mini, iPhone 11 Pro Max, or iPhone 13 Pro Max — the dimensions differ and the waterproof seal will not close correctly on any other model.

What comes in the box?
The two-piece waterproof case (front shell with built-in screen protector plus sealed back shell) in Black or Teal, ready to install — no tools required.

Does MagSafe really work through a waterproof case?
Yes — the back shell is thin enough for MagSafe wireless fast chargers and magnetic mounts to align and hold through the case. Charging is slightly slower than on a naked phone, which is normal for any case.

Does regular Qi wireless charging work too?
Yes — any Qi pad charges through the sealed back. Center the phone carefully, since the added 3.5 mm makes alignment matter more.

How waterproof is it, really?
It carries an IP68 rating: fully submersible to 6.6 ft / 2 m for up to 1 hour, plus protection from snow, ice, dirt, and dust. It is not rated for high-pressure jets or deep diving.

Can I take photos and videos underwater?
Yes — the sealed lens windows are optically clear and support high-definition underwater shooting. Touchscreens do not register input underwater (true of all capacitive screens), so use the volume button as your shutter.

What is the drop protection rating?
The case is drop-tested from 6.6 ft / 2 m — over 1,000 test drops — with the TPU corners absorbing the impact.

Does Face ID still work?
Yes — the front membrane sits clear of the TrueDepth sensor window, so Face ID unlocks normally with the case sealed.

Are the buttons and ports accessible?
Yes — volume and power work through sealed tactile covers, and the Lightning port sits behind a waterproof plug. Close the plug firmly before any water exposure.

Is the built-in screen protector touch-sensitive?
Yes — taps, swipes, FaceTime, and typing all register normally. If sensitivity feels off at first, press out trapped air and give it a day to settle.

Does the case muffle the speaker?
Sealed acoustic membranes let sound out while keeping water away. Calls stay clear; music loses a touch of volume versus a naked phone — the honest trade for full submersion protection.

Will it yellow or fade over time?
The shell uses a scratch-resistant, anti-yellowing finish. Rinse off chlorine and sunscreen after use and avoid storing it in direct sun, and it stays clean-looking for the life of the case.

Is it professional enough for work?
Yes — Black reads as a slim rugged case in a meeting, not dive gear, and the sealed shell means coffee spills and parking-lot rain are non-events.

Is this a good gift?
It is a favorite for boaters, beach families, and anyone with a MagSafe charger on their desk. Free 30-day returns make color swaps easy.

What is the return policy?
Yes — Gorilla Cases offers free 30-day returns on all iPhone 12 Pro Max cases. If the case doesn't fit your iPhone 12 Pro Max or you're not satisfied, contact our team within 30 days for a fast replacement or full refund. No restocking fees.

Why Gorilla Cases?

Gorilla Cases exists because phones got expensive and life did not get gentler. The Gorilla Family trusts us because we drop-test every design, submersion-test every seal, and describe honestly what a case can and cannot do — then back every order with free 30-day returns. Your iPhone 12 Pro Max has years of flagship duty left in it; seal it up and keep moving. Shop now at gorillacasestore.com

Read More From Gorilla Case Blogs

Want the deep dive on how this seal is rated? Read iPhone 12 Pro Max Waterproof Case | IP68 Rated Armor, then see the standard tested in real life in iPhone 12 Pro Max Waterproof IP68 Case.