Moto Edge Plus Full-Body Hybrid Shockproof Bumper Case

Why the Moto Edge Plus Full-Body Hybrid Shockproof Bumper Case Is Essential for Commuters and Design Lovers

Picture your Moto Edge Plus skidding across a subway platform after a shoulder-bag snag — and coming back to you with that gorgeous curved 6.7-inch Endless Edge display untouched. That is what this full-body hybrid bumper case is engineered for. It pairs a crystal-clear, anti-scratch polycarbonate back with a shock-absorbing TPU lining and bumper, wrapping your Moto Edge+ 5G (2020) in military grade drop-tested protection from every angle. Extra-raised lips and reinforced corners on the front frame guard the waterfall screen, while the glossy clear back showcases the phone's finish instead of hiding it. Built for commuters, students, design-conscious professionals, rideshare drivers, and anyone who thinks cases should not be cover-ups, this is the best Moto Edge Plus clear case for everyday protection. Welcome to the Gorilla Family.

Key Features

• 2 color choices: Black or Magenta TPU bumper, both framing the same crystal-clear polycarbonate back.
• Premium materials: rigid anti-scratch polycarbonate back panel with an impact-resistant TPU lining and perimeter bumper.
• Case type: full-body hybrid bumper case — one-piece snap-on design with reinforced front frame.
• Military grade drop tested: protects from all angles with shock-absorbing corners rated for drops of 6.6 ft / 2 m.
• Show-off clear back: full clarity and gloss let the Edge Plus's color and camera array stay visible — no anonymous black slab.
• Screen protection: extra-raised lips and corners on the hard front frame keep the curved display off any surface — honest note: because of the waterfall screen, this case does not include (and cannot fit) a built-in screen protector.
• Camera protection: a raised bezel rings the triple-camera module, holding the 108 MP lens glass about 1 mm clear of tabletops.
• Anti-slip grip: the TPU bumper's texture adds real hold on a phone that is famously slippery bare.
• Charging compatibility: the Moto Edge+ supports 15 W Qi wireless charging and it works straight through this case — this is not a MagSafe case, but pads and stands charge normally.
• Precise cutouts: open access to USB-C, the 3.5 mm headphone jack, speaker, and microphones, with tactile covered buttons.
• Compatibility: designed for the Motorola Moto Edge+ / Edge Plus 5G (2020, 6.7-inch) ONLY. It does NOT fit the Moto Edge (2020), Edge 20, Edge 30, Edge+ 2022, or Edge 50 series.

Materials Explained — What Polycarbonate and TPU Actually Feel Like

Polycarbonate is the same optically clear, nearly uncrackable plastic used in aircraft cockpit windows and bike helmets. Here it forms the glossy back panel — hard enough to shrug off keys and coins, clear enough to disappear over the phone's finish.

TPU (thermoplastic polyurethane) is the flexible shock absorber found in running shoe soles and hockey puck rims. It lines the inside of this case and forms the full perimeter bumper, catching impact energy at the corners — exactly where phones actually land.

Altogether the case weighs about 1.8 oz (50 g) and adds roughly 2 mm of thickness — slim enough to keep the Edge Plus's curves comfortable in hand while still earning its 6.6 ft / 2 m military grade drop rating.

Browse More Motorola Edge Plus Cases

Comparing rugged, wallet, and slim styles for your phone? Browse the full Motorola Edge Plus cases collection at Gorilla Cases, shop now and find the right protective phone case for your lifestyle.

Real-World Use Cases

• The Daily Commuter: survives the platform fumble and the coffee-shop counter drop — the raised front lips keep the curved glass off concrete and crumbs alike.
• The Design Lover: chose the Edge Plus for its looks and refuses to bury it — the clear back keeps the phone the star while the Magenta bumper adds a pop.
• The Student: backpack drops, lecture-hall slides, and dorm-floor tumbles all land on TPU corners instead of the 108 MP camera.
• The Rideshare Driver: snaps the phone in and out of a dash mount all day — the grippy bumper means no more windshield-to-floor slides.
• The Gift-Giver: a clear case is the zero-risk gift — it matches every phone color, and free 30-day returns cover the rest.

Feature-to-Benefit Mapping

Step-by-Step Installation Guide

1. Clean your Moto Edge Plus with a microfiber cloth — dust under a clear back is visible forever, so start spotless.
2. Align the camera cutout with the triple-lens module at the top of the phone.
3. Seat the top edge into the case first, then press the curved sides into the TPU channel.
4. Snap the bottom corners in last and run a thumb around the perimeter to confirm the bumper sits flush.
5. Test the buttons, USB-C port, and headphone jack, then set the phone on a wireless charger to confirm alignment.

Troubleshooting and Tips

• Edge-touch acting differently? The bumper's raised lip slightly changes how your palm meets the waterfall screen — Motorola's Edge Touch settings let you tune sensitivity in two taps.
• Buttons feel firm at first? The TPU covers break in within days; a couple dozen presses accelerates it.
• Faint marks inside the clear back? Micro-contact patterns from the TPU lining are normal and invisible from arm's length — they are not scratches.
• Wireless charging slow? Center the phone on the pad coil; thick metal pop-sockets or cards behind the case will block charging entirely.
• Keeping the clear back crystal? Wash with mild soap and water monthly — avoid alcohol wipes, which can haze polycarbonate's gloss over time.

FAQs

Which phones does this case fit?
It fits the Motorola Moto Edge+ / Edge Plus 5G (2020, 6.7-inch) only. It does NOT fit the Moto Edge (2020), Edge 20, Edge 30, Edge+ 2022, or Edge 50 series — dimensions and camera layouts differ.

What comes in the box?
One full-body hybrid bumper case in your chosen bumper color (Black or Magenta) with the clear polycarbonate back. No tools needed.

Does it work with wireless charging or MagSafe?
Qi wireless charging works through the case at the Edge Plus's full 15 W. This is not a magnetic case and does not add MagSafe — we describe honestly.

What is the drop protection rating?
Military grade drop tested to 6.6 ft / 2 m, with the TPU corners absorbing the worst angles — corner-first impacts — by design.

Why is there no built-in screen protector?
Honest answer: the Edge Plus's dramatically curved waterfall display does not accept flat built-in protectors. The case compensates with extra-raised lips and corners on the front frame.

Can I add my own screen protector?
Yes — curved-fit TPU film protectors work well with this case; rigid flat glass will not adhere to the waterfall edges regardless of case.

Does the fingerprint sensor still work?
Yes — the in-display optical sensor is unaffected by the case. If you add a film protector, re-register your fingerprint afterward.

Can I reach all buttons and ports?
Yes. The power and volume keys get tactile TPU covers, and USB-C, the 3.5 mm headphone jack, speaker, and mics stay open through precise cutouts.

Will the clear back yellow over time?
The back is hard polycarbonate — far more yellowing-resistant than soft clear TPU cases. The colored bumper is pigmented through and will not fade noticeably.

Does it add much bulk?
No — about 1.8 oz (50 g) and roughly 2 mm. The Edge Plus keeps its in-hand curve; it just stops being slippery.

Can I attach a lanyard or strap?
This model has no dedicated lanyard hole — the grip texture and 6.6 ft / 2 m rating are the protection strategy.

Is it professional enough for work or meetings?
Yes — the Black bumper with clear back reads as clean and understated; the Magenta version brings personality without looking like a toy.

Is this a good gift?
Yes — clear cases match every taste, and free 30-day returns mean a guaranteed fit for any Edge Plus owner.

Which colors are available?
Black and Magenta bumpers. If your preferred color shows out of stock, contact our team — restocks rotate regularly.

What is the return policy?
Yes — Gorilla Cases offers free 30-day returns on all Moto Edge Plus cases. If the case doesn't fit your Moto Edge Plus or you're not satisfied, contact our team within 30 days for a fast replacement or full refund. No restocking fees.

Why Gorilla Cases?

Gorilla Cases exists because great phone design deserves protection that does not erase it. The Gorilla Family trusts us because we drop-test every design, describe honestly — including why curved screens and built-in protectors do not mix — and back every order with free 30-day returns. Your Moto Edge Plus is a head-turner; keep it that way. Shop now at gorillacasestore.com

Read More From Gorilla Case Blogs

Want the full Moto Edge Plus protection picture? Read Motorola Edge Plus 2022 Case for the sibling-model comparison, then see Best Motorola Edge Plus Heavy Duty Case 2026 if you need belt-clip-grade armor.