Galaxy S22 Plus Holster Kickstand Case

The Galaxy S22 Plus Holster Kickstand Case Is Built for People Who Carry Their Phone on a Belt, Not in a Pocket

Your Samsung Galaxy S22 Plus is a 6.6-inch slab of glass that spends its day sliding around. It slides off tailgates. It slides out of shirt pockets when you lean over a truck bed. It slides across a workbench and stops at the edge, or does not stop at the edge. Most cases answer that problem by adding rubber and hoping for the best. This one answers it by taking the phone off the slide entirely and clipping it to your hip.

This is a full-body holster case with a 360-degree rotating belt clip that doubles as a kickstand. The manufacturer, Mignova, builds it as a three-part system: a rigid plastic back cover, a front frame with a built-in screen protector, and a detachable holster that rotates a full circle so the phone sits the way you want it on your belt, your bag strap, or your waistband. When the phone is out of the holster, that same clip folds down and props the Galaxy S22 Plus in landscape on any flat surface.

It is a straightforward piece of gear with a straightforward job: keep a large, expensive, slippery phone attached to you while you work. We stock it in Black. Welcome to the Gorilla Family.

Key Features at a Glance

• Full-body case design. The manufacturer classifies this as a full body case: a back cover, a front frame, and a holster, rather than a single open-faced shell.
• 360-degree rotating holster belt clip. The clip swivels a complete circle and detaches from the case, so you can carry the phone screen-in or screen-out and pull it free in one motion.
• Holster doubles as a kickstand. Clip the case into the holster on a table and the assembly stands the phone in landscape for video, calls, and recipe-following.
• Built-in screen protector in the front frame. The manufacturer's own exploded diagram labels the front layer a built-in screen protector, so the display is covered without buying separate glass. Read the detailed note further down this page before you order, because the published packing field for this item lists the hard case only.
• Raised front lip. Mignova states the front edge sits 4 mm higher than the screen, so the display does not rest on the surface when the phone is face down.
• Rigid plastic construction. The listed material is rigid plastic, and the manufacturer's diagram names the back layer a rigid plastic PC back cover.
• Manufacturer-listed protective features. Mignova lists 360 protection, dustproof, shockproof, anti-scratch, kickstand, and belt clip among the features of this case.
• Colour. Black.
• Device fit. Samsung Galaxy S22 Plus, the 2022 6.6-inch model. Not the Galaxy S22, not the Galaxy S22 Ultra, not any S21 or S23 model.

Materials and Build: What You Are Actually Holding

Mignova lists the material for this case as rigid plastic. In the manufacturer's own cutaway graphic, the back cover is labelled a rigid plastic PC back cover, which means polycarbonate. Polycarbonate is the same family of plastic used for safety glasses and machine guards. It is hard, it holds its shape, and it spreads a knock across a wide area instead of letting the force sit in one spot. It is also why a case like this feels structural rather than squishy when you pick it up.

The holster is the second structural piece. It is a separate shell with a spring-loaded clip on the back, and the case snaps into it. Because the clip rotates a full 360 degrees, you decide the orientation: screen facing your body on a job site where you are brushing past door frames, or screen facing out when you want to glance at a notification without unclipping. The rotation is the feature that makes a holster tolerable for a full shift rather than something you abandon by lunch.

The third piece is the front frame. The manufacturer's three-layer diagram labels it a built-in screen protector, and the raised-lip graphic shows the front edge standing 4 mm proud of the display. That raised edge is what keeps the glass off a counter when the phone goes down face-first, which is how most screens die.

Beyond those published details, we do not have manufacturer numbers. Case weight, overall thickness, camera bezel height, and the exact plastic blend used in the inner layer are not specified by the manufacturer, so we are not going to invent them. The product is made in China and sold under the Mignova brand.

What Is in the Box, and What Is Not

The packing list published for this item is the hard case. That means the case assembly and its holster, and nothing else. There is no charger, no cable, no separate glass screen protector in a retail sleeve, no cleaning cloth, and no camera lens film included with this product.

The screen protector question deserves a direct answer, because it is the one specification on this listing where the manufacturer's own materials and the packing field do not line up. The manufacturer's exploded three-layer diagram clearly labels the front frame a built-in screen protector, meaning a thin clear panel moulded into the front piece of the case rather than a separate adhesive film you apply yourself. The packing field for this item, separately, lists only the hard case. We have also seen at least one buyer of this supplier's item report receiving a case with no screen cover at all.

So here is the honest position: the manufacturer builds and markets this as a case with an integrated front screen cover, and that is what the design drawings show, but we cannot guarantee the integrated panel on every unit, and there is definitely no loose glass protector in the box. If a covered screen is the reason you are buying, order it, check it on arrival, and if the front frame arrives without the integrated panel, that is a wrong-item or defective case under our returns policy and we will cover the return label and replace it or issue store credit. We would rather tell you this up front than have you find out in a week.

On specifications we simply do not have: this case carries no published water-resistance rating, so treat it as not water resistant. It carries no published drop-test height and no military standard certification, so we will not quote one. It has no published magnet array, so it is not a MagSafe case and will not snap to magnetic chargers or magnetic car mounts. Wireless charging performance through this case is not specified by the manufacturer.

Browse More Galaxy S22 Plus Cases

Want to compare this holster build against slimmer, clear, or wallet styles before you commit? Explore the full lineup of Galaxy S22 Plus cases at Gorilla Cases and find the protective phone case that matches how you actually carry your phone.

Real-World Use Cases

• The electrician. Ladders, attics, crawl spaces, and panel work all involve bending at the waist with a phone somewhere on your body. On a belt clip, the phone goes where your hips go. In a shirt pocket, it goes where gravity says.
• The landscaper. Dust, clippings, and sprinkler mist are constant. The manufacturer lists this case as dustproof and anti-scratch, and the full-body format means fewer open edges for grit to collect against.
• The warehouse lead. Clip, unclip, scan, clip again, a hundred times a shift. A rotating clip means you are not twisting your wrist into an awkward angle every single time you reach for it.
• The delivery driver. In and out of a vehicle all day with a phone that needs to be reachable but not loose on a seat. The holster is the seat.
• The road-trip parent. The kickstand function turns a rest-stop table into a screen for the back seat, then folds away without a separate stand to pack.
• The gift-giver. If someone in your life has cracked two Galaxy screens in two years and keeps the phone in a back pocket, the holster is the behaviour change, not the case.

Feature to Benefit Mapping

How to Install It, Step by Step

1. Wipe the Galaxy S22 Plus down with a dry microfiber cloth, front and back. Anything left on the glass now will be trapped under the front frame later.
2. Remove any existing adhesive screen protector. A separate protector plus the case front frame is one layer too many and will stop the frame seating flush.
3. Separate the front frame from the back cover. Start at a corner notch and work around rather than pulling from the middle.
4. Lay the phone face-down into the front frame, lining up the camera cutout and the USB-C port opening first. If those two line up, everything else will.
5. Press the back cover on corner by corner until each edge sits flat. Do not force the middle before the corners are seated.
6. Check the buttons. Power and volume should click cleanly through their covers. If a button feels mushy, the frame is not fully seated on that side.
7. Slide the assembled case into the holster, rotate the clip through a full circle to confirm it moves freely, then fold it out and test the kickstand on a flat surface.
8. If your Galaxy S22 Plus uses the under-display fingerprint reader and it feels slower with the front frame installed, re-enrol the fingerprint with the case on.

Troubleshooting and Everyday Tips

• The belt clip feels stiff out of the box. That is the clip spring at full tension. Press the base of the clip while you seat it on a belt for the first few days rather than forcing it over the webbing.
• Dust got under the front frame. Pop the front frame off, wipe both the phone glass and the inside of the frame with microfiber, and re-seat camera end first so air pushes out rather than in.
• The fingerprint reader got slower. Delete the stored fingerprint and re-enrol it with the case installed. The sensor calibrates to whatever is between your finger and the glass.
• The kickstand slides on a smooth table. Fold the clip out to its full stop rather than partway. A partly extended clip puts the weight at the wrong angle.
• The case is filthy after a week on site. Mild soap and warm water on a cloth. Skip alcohol wipes and solvent cleaners, which can haze plastic and dull a finish over time.
• Charging feels unreliable. Take the case out of the holster before you set it on any charging pad. The holster shell adds a layer the pad was never designed to reach through.
• You are not sure it is the right phone. Check Settings, then About phone, on the device itself. This case fits the Galaxy S22 Plus only, and the S22 and S22 Ultra will not seat correctly in it.

Frequently Asked Questions

Which phone does this case fit?

The Samsung Galaxy S22 Plus, the 2022 model with the 6.6-inch display, and only that phone. The frame and cutouts are specific to it. It will not fit the Galaxy S22, the Galaxy S22 Ultra, the Galaxy S21 Plus, or the Galaxy S23 Plus.

Does this case fit the Galaxy S22 Ultra?

No. The Galaxy S22 Ultra is a physically larger phone with a different camera layout, and this case is the Galaxy S22 Plus version. Ordering it for an S22 Ultra will not work.

What colour can I order?

Black. It is the only colour we currently stock for this case.

Does it include a screen protector?

The front frame is built with an integrated screen cover according to the manufacturer's design drawings, but no separate glass or film protector is packed in the box, and the published packing list names the hard case only. Read the full note in the section above before you order if this is the deciding feature for you.

Is the belt clip removable?

Yes. The holster is a separate piece and the case lifts out of it, so you can carry the case on its own whenever you want.

Does the belt clip really rotate all the way around?

Yes. The manufacturer specifies 360-degree rotation, so you can set the phone at any orientation on your belt and change it without unclipping.

Can the holster be used as a kickstand?

Yes. The clip folds out and holds the phone in landscape on a flat surface, which is the same mechanism that holds it on your belt.

Is this case waterproof?

No. There is no published water-resistance rating for this case, so treat it as not water resistant and keep it out of rain, pools, and wash-down areas.

What drop height is it rated for?

No drop-test height is specified by the manufacturer. The listed protective properties are 360 protection, shockproof, dustproof, and anti-scratch, with no certified drop figure attached, so we are not quoting one.

Is it military-grade or MIL-STD certified?

No. The manufacturer makes no military standard claim for this case, and neither do we.

Does it work with MagSafe or magnetic car mounts?

No. There is no magnet ring published for this case, so it will not snap to MagSafe chargers or magnetic mounts. A clamp-style or vent-style car mount is the right choice with a holster case.

Does wireless charging work through it?

Wireless charging performance through this case is not specified by the manufacturer. If you charge wirelessly, take the case out of the holster first and expect the thickness of a rigid full-body case to matter.

What is the case made of?

Rigid plastic. The manufacturer's diagram identifies the back layer specifically as a rigid plastic PC, or polycarbonate, back cover.

How much does it weigh and how thick is it?

Weight and thickness are not specified by the manufacturer. What we can tell you is the category: this is a full-body holster case, which is the heaviest and thickest style of phone case there is, and it is meant to be.

Can I return it if it does not work out?

Yes, within 30 days, and the exact terms are published in full in the next section and on our policy page. The short version: unopened change-of-mind returns and defective or wrong items are both accepted, United States returns ship back on our free label with zero restocking fee, and resolution comes as store credit or an exchange rather than a cash refund.

Shipping and Returns: The Actual Published Terms

We would rather you read the real policy than a comforting summary of it, so here it is, straight from the Gorilla Cases return, exchange and store credit policy.

The window is 30 days from delivery, and it applies to defective items and to non-defective change-of-mind returns alike. After 30 days the window has closed, though we ask you to contact us anyway if the circumstances are unusual.

United States returns are free to send back. You download and print a return label, there are zero restocking fees, and standard shipping to you was free in the first place.

Resolution comes as store credit or an exchange, not a cash refund to your card. That is a real difference from some stores and you should know it before checkout. Store credit never expires and can be spent on any future order.

What we accept: defective or damaged items in any condition, wrong items received, and unopened change-of-mind returns in their original sealed packaging. What we do not accept: opened or used items, on hygiene grounds, because a case that has been handled cannot be sanitised and resold to the next customer.

Orders cannot be cancelled or modified after checkout. Our fulfilment system generates the label within minutes, which is what makes fast processing and free shipping possible. Confirm your phone model, your colour, your address, and your cart before you click.

International orders get the same 30-day window. Defective or wrong items ship back on a free label and are replaced at no cost. Non-defective international returns carry a return processing fee of AUD 4.99, roughly 4.99 US dollars.

To start a return, email info@gorillacasestore.com with your order number, your full name, photos, and a short explanation. You get a Return Authorisation number within 24 to 48 hours, and once your return arrives we resolve it within 2 business days. Do not ship anything back before you have the authorisation number.

Why Gorilla Cases

Gorilla Cases exists for people who treat a phone as a tool rather than jewellery. That shapes what we stock, and it also shapes how we write these pages. You will notice this listing says "not specified by the manufacturer" in several places instead of printing a confident number. That is deliberate. A drop height nobody tested, a water rating nobody certified, and a weight nobody weighed are worth less than nothing to you, because you would make a buying decision on them.

What we will tell you is exactly what the manufacturer publishes, exactly what is in the box, and exactly where the published information disagrees with itself, as it does on the screen protector question for this particular case. Then we stand behind the order with a 30-day window, a free United States return label, and no restocking fee, so that if the case is wrong for you, fixing it costs you nothing but an email.

Your Galaxy S22 Plus still has years of work left in it. Clip it on.

Read More From the Gorilla Cases Blog

Still weighing holster against waterproof against wallet for the S22 family? Start with Galaxy S22 Ultra Case Battle: Waterproof vs Aluminum Kickstand vs Wallet, which breaks down the trade-offs between the three dominant rugged styles.

Then widen the view with Best Samsung Cases for Galaxy S, Note, and A Series in 2025 for a model-by-model look at what fits what across the Samsung lineup.