Cell Phone Holder for Car Phone Mount Long Arm Dashboard

Why the Long Arm Dashboard Car Phone Mount Is Essential for Truck Drivers and Rideshare Pros

In a pickup or SUV, the dashboard is practically in another zip code — mount your phone flat on it and you are squinting at directions from three feet away. This long arm car phone mount solves the distance problem with a 6.2 in / 16 cm bendable aluminum gooseneck that brings the screen toward you, then curves out of your sightline. The base is an extra-strong vacuum suction cup faced with super-sticky gel, locked down by a lever and steadied by an anti-shake stabilizer, and the clamp takes phones from 4 to 7 inches with true one-hand docking.

Built for truck and SUV drivers, Uber and Lyft pros, taxi operators, road-trippers, and anyone whose windshield sits a long reach away, this is the best long arm dashboard phone mount for big cabs and busy shifts. Welcome to the Gorilla Family.

Key Features

• 2 color choices: Black and Grey, both with a low-glare matte finish that disappears into the cabin.
• Premium materials: bendable aluminum gooseneck core, impact-resistant ABS clamp, sticky-gel suction cup, and soft silicone pads at every phone contact point.
• Mount type: lever-locked vacuum suction base for windshield or large flat dashboard areas — removes cleanly without nasty marks.
• 6.2 in / 16 cm gooseneck arm: bends in every direction, bringing the phone closer to your eyes while curving around obstructions.
• Anti-shake stabilizer: a bracing collar at the base of the arm damps the bounce that plagues ordinary long-arm mounts on rough pavement.
• One-hand operation: press the lower-back button to release your phone; press the back edge of the clamp arms to lock it in — no second hand needed.
• 360° rotating ball joint: flip from portrait navigation to landscape video in a twist, with fine angle control in between.
• Wide device range: the clamp fits smartphones from 4 to 7 inches, including big phones in thick cases.
• Charging compatibility: the clamp leaves the bottom edge open for a charging cable; this is not a wireless or MagSafe charger — it is a pure mechanical hold.
• Bonus dashboard pad: an extra adhesive pad is included for textured dashes where suction alone cannot seal (not recommended for windshield use).
• Compatibility: fits virtually all smartphones from 4 to 7 inches — iPhone, Samsung Galaxy, Google Pixel, OnePlus, Moto, and more, case-on. It does NOT hold tablets, and the suction cup needs a sufficiently large, flat, smooth surface — small curved dash sections will not seal.

Materials Explained — What an Aluminum Gooseneck and Sticky-Gel Suction Actually Feel Like

The gooseneck is a coiled aluminum core — the same construction as a desk lamp neck. Bending it takes deliberate two-finger pressure, which is exactly what you want: easy to reposition when parked, immovable from road vibration. Once shaped to your cab, it holds that curve for months.

The suction cup wears a layer of super-sticky gel that feels like firm honey under a fingertip. It flows into the microscopic texture of glass or a smooth dash, and the locking lever compresses the seal vacuum-tight. If dust ever dulls the tack, a warm-water rinse and air-dry restores it to factory grip. Everywhere the mount touches your phone, soft silicone pads — the same gentle compound as a watch strap — keep glass backs and painted rails pristine.

The whole mount weighs about 7 oz (198 g) — enough mass to anchor a 7-inch phone steady at full extension, still light enough to move between vehicles in a minute.

Browse More Car Mounts and Driving Gear

Comparing gooseneck, vent, and short-arm suction options? Browse the full Gorilla Cases car mount collection, shop now and find the right protective phone case for your lifestyle.

Real-World Use Cases

• The Pickup Driver: the deep dash of a full-size truck finally stops being a problem — the 6.2 in arm reaches the phone back to natural reading distance.
• The Rideshare Pro: docks and releases the phone one-handed at every pickup, and the anti-shake stabilizer keeps the pickup map legible on rough city streets.
• The Road-Tripper: bends the neck toward the passenger for co-pilot duty, then back toward the wheel for the solo stretch — no remounting.
• The Taxi Operator: needs the meter app and navigation visible twelve hours a day; the gel cup holds through full shifts and removes without residue at trade-in time.
• The Gift-Giver: the 4–7 in clamp fits whatever phone the recipient owns now or upgrades to next year.

Feature-to-Benefit Mapping

Step-by-Step Installation Guide

1. Clean the windshield spot or a large, flat, smooth dash area with a microfiber cloth and let it dry fully; use the extra dashboard pad only if the suction cup cannot seal directly (and never on the windshield).
2. Press the gel suction cup firmly against the surface and flip the locking lever down until it clicks.
3. Bend the gooseneck so the clamp sits at eye-line distance without blocking your view of the road.
4. Press the back edge of the clamp arms with your phone in place — they close and lock with one push.
5. Rotate the ball joint to portrait or landscape, plug in your cable if you charge while driving, and press the release button once to confirm smooth one-hand removal.

Troubleshooting and Tips

• Suction cup not holding firmly? Wash the gel face with warm water, let it air-dry completely, and re-mount — dust kills tack, and a rinse fully restores it.
• Screen bouncing on rough roads? Shorten the working curve — a tighter, lower bend in the gooseneck plus the stabilizer collar eliminates nearly all wobble.
• Dash too textured or curved for suction? Apply the included adhesive dashboard pad to create a flat landing zone — but keep the pad off your windshield.
• Ball joint loosening over weeks? A quarter-turn of the tension collar behind the cradle restores firm, fingertip-adjustable resistance.
• How should you clean it? Damp cloth on the arm and silicone pads; warm water only on the gel cup. Avoid alcohol wipes — they dry out both the gel and the padding.

FAQs

Which phones does this mount fit?
Smartphones from 4 to 7 inches — every recent iPhone, Samsung Galaxy S/Note/A, Google Pixel, OnePlus, and Moto, with cases on. It does NOT hold tablets or e-readers, and back-mounted ring grips can interfere with the clamp arms.

What comes in the box?
The long arm suction mount (gooseneck, clamp, and gel cup assembled) plus one extra adhesive dashboard pad for textured surfaces. No tools needed.

Does it charge my phone or work with MagSafe?
No — this is a mechanical holder with no charging coil or magnets. The open bottom edge leaves your charging port free for any cable.

Where can I mount it?
On the windshield or any large, flat, smooth dashboard area. The suction cup needs full contact to seal — small, curved, or heavily grained surfaces require the included dash pad (dash use only).

Will it block my view of the road?
No — that is the gooseneck's job. Bend it low and toward you so the phone sits above the dash line but below your sightline; the arm holds whatever curve you set.

Does it really work one-handed?
Yes — press the lower-back button and the clamp springs open to release; press the back edge of the arms and they close onto the phone. Both actions are single-hand, eyes-up moves.

Will it shake at highway speed?
The anti-shake stabilizer and stiff aluminum core keep movement to a slight shimmer at most — dramatically steadier than spring-arm goosenecks. A lower, tighter bend makes it steadier still.

Will the suction cup mark my windshield or dash?
No — the gel removes cleanly without residue. The adhesive dash pad is semi-permanent, so place it deliberately.

Does summer heat or winter cold loosen it?
No — the gel compound is formulated for cabin temperature swings, holding from frosty mornings through baking afternoons.

Can I move it between vehicles?
Yes — flip the lever, peel the cup by its tab, and re-mount in the next vehicle in under a minute. Rinse the gel with warm water if it picks up dust in transit.

Will it scratch my phone?
No — every contact point is faced with soft silicone padding, so glass backs and anodized rails stay flawless through years of daily docking.

Is this a good gift?
Yes — especially for truck, SUV, and rideshare drivers. The 4–7 in clamp fits any phone they own, and free 30-day returns cover the rest.

What is the return policy?
Yes — Gorilla Cases offers free 30-day returns on all car mounts. If the mount doesn't fit your vehicle or you're not satisfied, contact our team within 30 days for a fast replacement or full refund. No restocking fees.

Why is the dash pad not recommended for the windshield?
The adhesive pad is engineered for porous, textured dash plastic. On glass it is unnecessary — the gel cup seals better directly — and removing adhesive from a windshield is a chore you do not want.

Why Gorilla Cases?

Gorilla Cases exists because gear should work in real trucks on real roads, not just in studio renders. The Gorilla Family trusts us because we test hard, describe honestly — including telling you plainly that suction needs a flat surface and where not to use the adhesive pad — and back every product with free 30-day returns. Bring the screen to your eyes and keep your hands on the wheel. Shop now at gorillacasestore.com

What Gorilla Family Customers Are Saying

★★★★★
Made for full-size trucks
The dash in my F-150 is so deep my old mount made navigation unreadable. This gooseneck brings the phone a solid six inches closer and the anti-shake collar actually works — the screen stays crisp even on the gravel section of my commute.
— Hank W., Knoxville, TN

★★★★★
Best mount I have used for rideshare
Eight-hour shifts, phone in and out at every airport run. The one-hand release is genuinely fluent and the gel cup has stayed locked to my windshield for four months straight. The Grey blends into my interior perfectly.
— Amara O., Toronto, ON, Canada

★★★★★
Suction cup is shockingly strong
I was skeptical of suction after two cheap mounts hit the floor, but this one needed real effort to remove when I rearranged it — the lever lock makes the difference. Washing the gel with warm water like the instructions say really does renew the grip.
— Felipe R., San Antonio, TX

★★★★★
Bends exactly where I need it
I set the curve once — up over the dash hump and toward the wheel — and it has not drooped a millimeter in months. Phone in a thick case clamps in fine. My husband borrowed it for his ute and immediately ordered his own.
— Sophie L., Melbourne, VIC, Australia

★★★★½
Great reach, slight shimmer at speed
The arm length transforms a big cab — directions are finally readable at a glance. Being honest: at 70 mph there is a faint shimmer on the screen with my plus-size phone, though a lower bend mostly cured it. Still the best long-arm mount I have owned.
— Garrett P., Boise, ID

Read More From Gorilla Case Blogs

Choosing the right mounting style for your vehicle? Read Gorilla Cases Car Mounts – Secure, Strong, Built for Any Drive, then see Secure Your Drive: Gorilla Cases' Premium Car Phone Holders for the whole lineup.